manual

29 En
English
ADVANCED
OPERATION
By setting the timer function, you can set this unit to play the selected input source automatically at the specified time.
1 Press TIMER on the front panel repeatedly
until “TIMER” appears on the front panel
display, and push MULTI JOG immediately.
2 Rotate MULTI JOG clockwise to select
“TIMER ON”, and push MULTI JOG again.
lights up in the front panel display.
3 Rotate MULTI JOG to set the time you want to
start playback. After you set the time, push
MULTI JOG to confirm.
For details about time setting, refer to steps 2 and 3 in
“Adjusting the clock” (see page 15).
4 Rotate MULTI JOG to select the input source
you want to play back, and push MULTI JOG
to confirm.
Each time you rotate MULTI JOG, the input display
changes as follows:
5 Rotate MULTI JOG to set the interval for
playback (30 to 90 mins), and push MULTI
JOG to confirm.
You can set the interval in 10-minute steps.
■ To cancel the timer function
Select “TIMER OFF” in step 2.
disappears from the front panel display.
Adjust the clock of this unit (see page 15) before setting the timer.
Setting the timer
STANDBY/ON
PHONESPORTABLE USB SOUND MODE
VOLUME
INPUT
PUSH-ENTER
MULTI JOG
TIMER
MULTI JOG
TIMER
00:00ONTIMER
Flashes
CDTIMER
Input source
CD FM AM USB
Note
60OFFTIMER
Interval