manual

36 En
Troubleshooting
Remote control
Problem Cause Solution
The remote control does not
work properly.
The remote control may be operated
outside its operation range.
For information on the remote control
operation range, refer to “Using the
remote control” (see page 8).
The remote control sensor on this
unit may be exposed to direct
sunlight or lighting (inverted
fluorescent lamps).
Change the lighting or orientation of
this unit.
The batteries may be worn out. Replace the batteries with new ones
(see page 8).
Disc playback
Problem Cause Solution
Some button operations do
not work.
The disc loaded into this unit may not
be compatible.
Use a disc supported by this unit (see
page 38).
Playback does not start
immediately after pressing h .
The disc may not be set in the disc
tray properly.
Set the disc in the disc tray properly.
The disc may be dirty. Wipe the disc clean.
The disc loaded into this unit may not
be compatible.
Use a disc supported by this unit (see
page 38).
When this unit was moved from a
cold to warm place, condensation
may have formed on the disc reading
lens.
Wait for an hour or two, and try again.
The disc is ejected.
The disc loaded into this unit may not
be compatible.
Use a disc supported by this unit (see
page 38).
The message “No Disc”
appears in this unit display
even though a disc is
inserted.
The disc may not be set in the disc
tray properly.
Set the disc in the disc tray properly.