User Manual

Firmware Update Procedure for
CRX-N560/N560D (MCR-N560/MCR-N560D)
IMPORTANT NOTICE
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to
restore proper operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest firmware.
Click here for Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the Troubleshooting section
[ 1. Firmware Update Through the Internet ]
Requirements:
Your network CD receiver is connected to the Internet if you can receive
Internet radio stations. (See owner’s manual for details)
STEP 1 Power on the unit and enter option settings
Press OPTION button on the remote control.
STEP 2 Start Update
Using the UP/DOWN buttons, select menu “System Config”
and press ENTER button. After that, select “Firm Update” using
UP/DOWN buttons and press Enter button.
Initially, “Network” is flashing on the display.
To perform network update, select “Network” and press Enter button.
(Update in progress…)
ENTER
UP
DOWN
OPTION