User Manual
Table Of Contents
- Contents
- Introduction
- Controls and connectors
- Procedures preparing for use
- Setup and connections
- Configuring the device from a TV screen (on-screen display menu)
- Using Yamaha CS Manager to specify detailed settings
- Appendix
CS-500 User Guide
26
The on-screen display menu is a feature that displays the device’s settings menu on a TV screen. It can be operated with
the remote control.
With the on-screen display menu, settings can be specified for the meeting area, Smart framing mode, camera presets,
microphone, speaker and Bluetooth.
NOTE
• This function cannot be used When used as webcam (Page 19).
• In order to use this function, first follow the procedure in “Pairing the device and remote control” (page 22).
• In order to use this function, first follow the procedure in “Activating HDMI connection/DisplayLink function/Bluetooth/USB
audio” (page 23).
Displaying the device’s settings menu
1. Press the menu button on the remote control.
The on-screen display menu appears on the TV.
2. Navigate with the pan/tilt button on the remote control.
Use the pan/tilt button (arrow button) to move the cursor up/down/left/right.
Configuring the device from a TV screen (on-screen
display menu)