User Manual

103
Property
Type
Values
Default Value
Description
4 : G.726
5 : G.729
voip.ptime
NUMBER
10..60 : ptime interval in ms
20
The ptime (packetization interval) value for a codec determines
the length of time in milliseconds represented by the media in an
RTP packet which is used to transmit audio traffic. The valid range
is 10 to 60 in 10 ms increments.
voip.mwi
BOOLEAN
0 : Disable MWI signaling
1 : Enable MWI signaling
0
Enable displaying the message waiting indicator (MWI) on the
device and enable receiving message waiting notifications from
the PBX. The PBX must be configured to support voice mail for the
registered user in order for this feature to work properly.
voip.vm-number
TEXT
VoIP voicemail number.
The number that is dialed when voicemail is called from the UI.
voip.do-not-disturb
BOOLEAN
0 : Disable DND
1 : Enable DND
0
Configure do-not-disturb (DND) setting.
voip.auto-answer
NUMBER
0 : Disable auto-answer
200 : Enable auto-answer
0
Auto answer incoming VoIP calls. We recommend enabling this
feature only for test purposes. If the phone is set to Do Not
Disturb or if there are no available lines, the Forward rules will
apply. If there are no Forward rules specified, the incoming call will
be sent to voice mail. If voice mail is not supported, the call will be
rejected.
voip.duration
NUMBER
0 : No maximum
1..10080 : Maximum VoIP call
duration in minutes
0
Specifies the maximum VoIP call duration in minutes. When the
call duration reaches the maximum duration, the call will be
automatically terminated. The maximum limit is 10,080 minutes,
or 7 days. A 0 indicates no maximum call duration.
voip.dial-plan
TEXT
dialplan : Dial plan string.
Specifies the VoIP dial plan string. See the Appendix for a detailed
description of dial plan settings.
voip.always-
forwarding
BOOLEAN
0 : Disable
1 : Enable
0
Enable or disable forwarding all incoming VoIP calls to the
specified number.
voip.always-
forwarding-num
TEXT
VoIP dialing number.
Forward all incoming VoIP calls to the specified number.
voip.busy-
forwarding
BOOLEAN
0 : Disable
1 : Enable
0
Enable or disable forwarding incoming calls to the specified
number if the local phone is in 'Do Not Disturb' mode or if both
lines are busy.