User Manual

112
notify audio.mute 0
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
camera-ptz-home
Description: PTZ settings for the default home position. When the CS-700 detects that an USB
connection has been established to a computer, either at startup or after a previous USB
disconnection, it will revert to the PTZ home settings. Calling set on this property will move
the camera to the newly defined PTZ position.
Property Actions: set, get, notify
Default Value: 0 0 100
Command Definition:
Action
Definition
get
get camera-ptz-home
response
val camera-ptz-home <"pan"> <"tilt"> <"zoom">
set
set camera-ptz-home <"pan"> <"tilt"> <"zoom">
notify
notify camera.camera-ptz-home <"pan"> <"tilt"> <"zoom">
Parameters:
Parameter
Description
-30..30
Pan setting (default value is 0)
-18..18
Tilt setting (default value is 0)
100..400
Zoom setting (default value is 100)
CLI Format Examples:
get camera-ptz-home
val camera-ptz-home 0 0 100
set camera-ptz-home 0 0 100
notify camera.camera-ptz-home 0 0 100
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
camera-image-defaults
Description: Camera image default settings. The settings impacted by this property are Backlight,
Brightness, Contrast, Saturation, Sharpness, Hue, and Gamma. The order of the parameters
is relevant. None of the parameter can be left out.
The Camera image defaults are not automatically applied when setting these values. To
apply the values call the cam-image-apply-defaults property.
Property Actions: set, get, notify
Default Values: 0 125 110 100 50 90 255