User Manual

120
call-status
String as shown below for each call type.
VoIP Calls
idle
Initialization state.
incoming
Receiving incoming VoIP call.
calling
Initiating outgoing VoIP call.
failed
Outgoing call attempt failed; it is followed by “disconnected” when the attempt is
disconnected.
connected
Call is connected.
onhold
Call is on hold.
connected-in-
conf
Call is in a conference.
disconnected
Not in a call or phone is not registered.
update
The call is transferred by the far end (with some call managers the call state will remain
“connected” after the transfer).
missed
Incoming VoIP call missed due to Do-Not-Disturb.
USB Calls
active
USB audio is active.
idle
Initialization state.
incoming
Incoming USB call signal is received from host.
inactive
USB audio is not active.
onhold
USB audio is on hold.
connected-in-
conf
Call is in a conference.
BT Calls
active
BT audio is active.
Idle
Initialization state.
incoming
Incoming BT call signal is received from connected phone.
inactive
BT audio is not active.
onhold
BT audio is on hold.
connected-in-
conf
Call is in a conference.
Format Examples:
get status 1
val status 1 connected
notify call.status 1 connected
Supported Products: CS700-AV, CS700-SP
status-all
Description: Query all call status. See "call-status" property for description of status types. Status
information on VoIP lines is only provided in the –SP and –DS version of the CS-700
product.
Property Actions: get
Command Definition:
Action
Definition
get
get status-all