User Manual

127
Action
Definition
get
get do-not-disturb
response
val do-not-disturb <0|1>
set
set do-not-disturb <0|1>
notify
notify voip.do-not-disturb <0|1>
Parameters:
Parameter
Description
0
Disable DND
1
Enable DND
Format Examples:
get do-not-disturb
val do-not-disturb 0
set do-not-disturb 0
notify voip.do-not-disturb 0
Supported Products: CS700-SP
dtmf
Description: Send DTMF digit on given VoIP line during an active call. This is not to dial a number, but to
send DTMF tones during the call.
Command Definition:
Action
Definition
set
set dtmf <"voip-line-id"> <"digit">
Parameters:
Parameter
Description
1
VoIP line 1
2
VoIP line 2
3
VoIP line 3 (used for transfer)
digit
dtmf digit, use “-“ to stop previous digit
Format Examples:
set dtmf 1 5
set dtmf 1 -
Supported Products: CS700-SP
registration
Description: Query SIP registration status.