User Manual

137
Optimize Windows for CS-700 Audio
To configure the CS-700 device as the default device and to improve audio
follow this one-time setup procedure:
1. Right click on the speaker icon in the lower right hand corner of the
Windows taskbar.
2. Select Sounds from the menu.
3. Click the Playback tab.
4. Right click on the Yamaha CS-700 Device.
5. Select “Set as Default Device” from the menu.
6. Right click on the Yamaha CS-700 Device again.
7. Select “Set as Default Communication Device” from the menu.
8. Right click on Yamaha CS-700 Device one more time.
9. Select Properties from the menu.
10. If there is an “Enhancements” tab, click on it.
11. Check the “Disable all enhancements” box.
12. Click on the Advanced tab.
13. Select “2 channel, 24 bit, 48000 Hz (Studio Quality)” from the drop-down
menu under Default Format.
14. Click “Test.” You should hear the test jingle.
15. Click “Apply”, then “OK”.
16. Click the Recording tab.
17. Right click on the Yamaha CS-700 Device.
18. Select “Set as Default Device” from the menu.
19. Right click on the Yamaha CS-700 Device again.
20. Select “Set as Default Communication Device” from the menu.
21. Right click on the Yamaha CS-700 Device one more time.
22. Select Properties from the menu.
23. Click on the Levels tab.
24. Set the Microphone level to 50.
25. Click “OK”.
26. Click “OK” to close the Sound Window.