User Manual

80
Dialing and call control
The dialer is designed to manage telephone calls as well as USB and Bluetooth
connections. It allows establishing calls, controlling calls, and mixing calls
together to create conferences.
As mentioned earlier, the bottom line of the dialer indicates activity of the
different supported communication channels. Generally, if a USB cable is
connected to the CS-700 and activity is being detected, the USB line is active.
If no activity is detected, the symbol will be greyed out. Similarly, when a
Bluetooth call is detected, the Bluetooth symbol will show activity.
When talking about a “call” in this section, this can mean a USB connection, a
VoIP call, or a Bluetooth call.
Dialing
To start a call, select “Dial” from the main
menu, touch the key-pad symbol on the
bottom, or touch the green phone symbol on
the main screen. The keypad will open
allowing the user to type in the phone number
for the call and establish the call by pressing
the green call button. The screen will change
and showing the outgoing call activity until the
call is established.