User Manual

Active call

Once the call is established, the dialer screen

will change to an informal screen with call

information. The active call with the telephone

number or contact name that was called is

shown, with the call duration. There are also

call control and audio control buttons.

For audio control, the volume up and volume

down button on the dialer screen are

synchronized with the CS-700 audio behavior.

The microphone mute button on the bottom is

also synchronized with the mute behavior of

the CS-700.

Touching the red phone symbol will end the

call.

The SIP phone line that is active with the call

is shown as active (green) on the bottom of the

dialer screen.

Touching the hold symbol will put the call on hold, touching join allows

creating a conference with other active audio streams.

To enter digits during the call, touch the dial-pad symbol on the bottom to

open the dial pad and enter the digits.