User Manual

At this point, audio from the Bluetooth connected device will be redirected onto

the CS-700 speakers, and automatically mixed with other audio sources

connected to CS-700, such as USB-based audio. Audio in from the MIC array

will be redirected to the mobile device.

The Bluetooth connection will remain engaged until any of several actions

occurs:

• The User deactivates the connection from the mobile device.

• The User moves out of range of the Bluetooth signal.

• The User ceases to transfer data over the connection, and a connection

timeout occurs.

Note: the connection timeout is a configurable parameter, set either through

Web-UI or a configuration file. When set to 0, the connection will never drop

from data inactivity.

Aux-IN Audio Support

To utilize the CS-700 as a room speaker system such as for the display in TV

mode, connect your source of audio via a standard 3.5mm stereo jack

connector on the back of the unit. Gain is automatically adjusted by default

and the Volume Up/Down controls will manage the sound level. Gain can be

manually set as well, configurable through the Web-UI, the Service Application,

or from a configuration file.