User Manual

93
Property
Type
Values
Default Value
Description
sys.snmp-
community
TEXT
Read-only community string.
public
Specifies the SNMP read-only community string used for queries
from the server and transmitted traps. Read-only indicates the
authorization level. The device does not support write operations
initiated through SNMP.
sys.snmp-contact-
name
TEXT
Contact name.
Specifies the contact name, typically the system administrator.
This string is informational and can include an email address. It is
not associated with traps.
sys.snmp-device-
location
TEXT
Device location.
Specifies the location of the device for informational purposes.
sys.snmp-address
TEXT
IP address or DNS name.
Specifies the SNMP server address to which traps will be sent.
Leave blank to disable traps.
sys.recent-call-
enabled
BOOLEAN
0 : Disable recent call list
1 : Enable recent call list
1
Enables or disable the Recent Calls list.
sys.ui-mask
NUMBER
0 : All menus are enabled in the
dialer
4 : Do not allow modifications of
call forwarding
8 : Do not allow modifications of
call history
16 : Do not allow modifications
of contacts
32 : Do not allow modifications
of DND
0
Enable or disable menus in dialer via a bit mask. Add the values of
all features that are to be disabled. For example a value of 40
(8+32) will not allow modifications to the call history, and does not
allow modification of the DND.
audio.eq
NUMBER
1 : Voice
2 : Bass boost
3 : Treble boost
1
EQ setting used to adjust the speaker frequencies to your
preference for the room and the types of calls.
audio.high-pass-
filter
INDEXED_
OPTION
0 : None
1 : 110 Hz
2 : 140 Hz
3 : 175 Hz
4 : 225 Hz
0
High-Pass filter setting. High-Pass filters are provided to adjust to
room and application requirements. Use the High-Pass filter in
rooms that have a high background noise in the low frequencies
(air conditioning, lighting fixtures, etc.). All filters are bi-quad
filters, reducing the signal by 6dB per octave.
audio.analog-
audio-in-mode
BOOLEAN
0 : Automatic gain setting
1 : Manually specify gain setting
0
For the audio in port, select the gain setting mode, either auto or
manual.