User Manual
Yamaha CS-700 Integrators Reference Guide 158
snmp-community
Specifies the SNMP read-only community string used for queries from the
server and transmitted traps. Read-only indicates the authorization level.
The device does not support write operations initiated through SNMP.
snmp-contact-name
Specifies the contact name, typically the system administrator. This string
is informational and can include an email address. It is not associated with
traps.
snmp-device-location
Specifies the location of the device for informational purposes.
The following read-only properties and traps are supported.
Read-only Properties
• Serial number
• MAC address
• Base FW version
• USB connection active (0,1)
• USB microphone audio stream active (0,1)
• USB speaker audio stream active (0,1)
• USB video stream active (0,1)
• Bluetooth connection active (0,1)
• VoIP call active (0,1)
Traps
• USB connection state changes
Below is the SNMP MIB for the CS-700.
CS700-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, enterprises FROM
SNMPv2-SMI
OBJECT-GROUP FROM SNMPv2-CONF
DisplayString FROM SNMPv2-TC
;
yamahaAgentMIB MODULE-IDENTITY
LAST-UPDATED "201710010000Z"
ORGANIZATION "www.uc.yamaha.com"
CONTACT-INFO
"postal: Yamaha Unified Communications
144 North Rd
Sudbury, MA 01776
email: uc-customersupport@music.yamaha.com"
DESCRIPTION
"Defines monitoring structures for the Yamaha SNMP agent for CS-700."
REVISION "201710010000Z"
DESCRIPTION "Initial revision"
::= { enterprises 1182 }