User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
104
Property
Type
Values
Default Value
Description
voip.busy-
forwarding-num
TEXT
VoIP dialing number.
Forward incoming calls to the specified number if the local phone
is in 'Do Not Disturb' mode or if both lines are busy.
voip.noanswer-
forwarding
BOOLEAN
0 : Disable
1 : Enable
0
Enable or disable forwarding incoming VoIP calls to the specified
number if the call is not answered within the duration specified in
the 'noanswer-delay' attribute.
voip.noanswer-
forwarding-num
TEXT
VoIP dialing number.
Forward incoming VoIP calls to the specified number if the call is
not answered within the duration specified in the 'noanswer-delay'
attribute.
voip.noanswer-
delay
NUMBER
2..30 : Seconds to wait before
forwarding a call
10
Number of seconds to wait before forwarding an unanswered
incoming call to the 'noanswer-forwarding-num' number.
Firmware
attributes
Type
Values
Default
Value
Description
version
TEXT
""
Provide the firmware version.