User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
126
Parameters:
Parameter
Description
source-line-id
<1..2>
Line ID of call being transferred
target-line-id
<3>
Line ID of call to which the source will be transferred
Format Examples:
hold 1
dial 3 5555555555
transfer 1 3
Supported Products: CS700-AV, CS700-SP
vm-count
Description: Query voice mail count via VoIP from the Call Manager.
Property Actions: get, notify
Command Definition:
Action
Definition
get
get vm-count
response
val vm-count <"vm-count">
notify
notify voip.vm-count <"vm-count">
Parameters:
Parameter
Description
vm-count
Number of VoIP voice mail messages.
CLI Format Examples:
get vm-count
val vm-count 2
notify voip.vm-count 2
Supported Products: CS700-SP
do-not-disturb
Description: Configure do-not-disturb (DND) setting.
Property Actions: set, get, notify
Default Value: 0
Command Definition: