User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
127
Action
Definition
get
get do-not-disturb
response
val do-not-disturb <0|1>
set
set do-not-disturb <0|1>
notify
notify voip.do-not-disturb <0|1>
Parameters:
Parameter
Description
0
Disable DND
1
Enable DND
Format Examples:
get do-not-disturb
val do-not-disturb 0
set do-not-disturb 0
notify voip.do-not-disturb 0
Supported Products: CS700-SP
dtmf
Description: Send DTMF digit on given VoIP line during an active call. This is not to dial a number, but to
send DTMF tones during the call.
Command Definition:
Action
Definition
set
set dtmf <"voip-line-id"> <"digit">
Parameters:
Parameter
Description
1
VoIP line 1
2
VoIP line 2
3
VoIP line 3 (used for transfer)
digit
dtmf digit, use “-“ to stop previous digit
Format Examples:
set dtmf 1 5
set dtmf 1 -
Supported Products: CS700-SP
registration
Description: Query SIP registration status.