User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
129
Upgrading the Device Firmware
From time to time, new device firmware might be made available to upgrade the
functionality and feature set of the CS-700 device. Download such software
from https://uc.yamaha.com/products/video-sound-bar/huddle-room-system/. The
software is packaged as a bundle file which is applied to the CS-700 directly
through the Web-UI, the Service Application, or the provisioning file. The file
will have a naming convention with suffix “.bundle” at the end.
Through the Web UI
The upgrade firmware file can be used on the Tools-Update section of the web
user interface to upgrade the unit. Refer to the Web UI section of this manual
for more details on how perform the upgrade.
Through the Service Application
The CS-700 firmware can be upgraded from a directly-attached PC through the
Service Application. Refer to the Service Application section of this manual for
more details on how perform the upgrade.
From the Provisioning Server
To upgrade systems using the provisioning server, the firmware element in the
provisioning file needs to be changed. The version attribute value needs to be
changed to the correct firmware version of the file that is provided. The
element value needs to be updated to the file name of the corresponding
firmware bundle.
<firmware version="1.4.0.2">CS700-1-4-0-2.bundle</firmware>
Refer to the section on configuring CS-700 devices using provisioning servers
and option 66 or option 150 for more details.