User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
24
Security Settings
The “Enable recent calls” selection enables / disables keeping a list of the last
phone calls made from or to the CS-700. When disabled no information on the
calls will be kept on the system.
When “Require HTTPS” is enabled, the web interface will switch from http to
https. Please note that when using HTTPS, the CS-700 device does not have a
certified security certificate and the web browser will warn of a potentially
unsecure connection.
“Enable room control access” allows the Telnet or SSH interface into the CS-
700 to be opened. Changing this setting will reboot the CS-700 unit.
Username and factory default password for the Telnet/SSH access are
roomcontrol and Yamaha-CS-700, respectively.
The Room control password for the roomcontrol user can be changed. Enter
the password of your choice, and confirm it.