User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
34
The calls section allows defining behavior and options available to the user
around call behavior.
Enable Message Waiting indicator allows the dialer to show information on
possible voice messages that are stored on the server for this number.
Set DnD puts the phone into this mode by default.
Enable auto-answer automatically answers any incoming call. This setting is
not recommended to be used.
The Ring tone selection offers several ring tones as stored on the device.
Provide a voicemail number to allow picking up voice mails with one button
press from the dialer.
Maximum call duration allows setting a maximum number for a phone call in
minutes. The default of “0” means no maximum.
If a dial plan is required for the phone please enter the dial plan string here.
See the Appendix for a definition of the dial plan string.
Forwarding Settings
The Forwarding settings allow specifying under which conditions calls should
be forwarded, and to which number.
Camera
The Camera settings area allows reviewing the current settings of the camera,
and allows applying them as home settings or default settings.