User's Manual

49
Service Application
The CS-700 device can also be configured and managed through a PC
connected via USB using a software client called the “Service Application”. The
Service Application enables the locally attached Computer to gain access to the
CS-700 configuration and operating parameters over the USB cable. Under
these conditions, the Network IP link is not required and can be disconnected
The Service Application is designed for use by CS-700 Installation Teams and
System Administrators who choose to directly maintain systems, rather than
accessing remotely over IP. It can also be used for maintenance tasks while
directly being connected to the CS-700 system. The service application also
allows adjusting the camera’s Pan, Tilt, and Zoom settings and can be used to
adjust the home setting of the camera.
The scope of capabilities in the Service Application is detailed in the following
sections.