User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
63
time, pairing mode or the connecting mode will terminate. A value of 0
indicates no timeout. The default value is 60 sec.
The “Enable NFC” box allows control over the NFC pairing feature. De-selecting
this box will disable the NFC pairing feature associated with the NFC front-
panel indicator button. System defaults to NFC-enabled.
The “Bluetooth call auto-join” allows a Bluetooth call on the paired and linked
Bluetooth device to automatically join a conference if there is no dialer control
app. System defaults to Bluetooth call auto-join – disabled.
The “Auto Unpair-on-Disconnect” allows CS-700 to automatically unpair a
linked Bluetooth device when that device disconnects. This option will prevent
Bluetooth auto-connection. When this option is enabled, a pairing operation is
required for each Bluetooth connection. System defaults to Bluetooth Auto
Unpair-on-Disconnect - disabled.
When clicking Enter Pairing Mode the Yamaha CS-700 starts to broadcast its
Bluetooth information and can now be found from other Bluetooth devices.
Exit Pairing Mode will end the broadcast of the Bluetooth information. Unpair
All Devices will remove all Bluetooth information of previously paired devices.