User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
67
Configuration
The configuration tab allows Exporting and Importing configuration
information of the CS-700. This is specifically of interest if several CS-700
devices are to share identical configurations. The first CS-700 can be fully
configured and exported as a “Golden Reference” configuration for the rest of
the CS-700 estate. Subsequent CS-700 units can “duplicate” the Golden
Configuration by re-Importing the original configuration file. For a description
of the configuration parameters, see the provisioning section further down in
this manual.
System defaults can be restored in a granular way by selecting which settings
of the configuration to reset to defaults and then clicking the “Reset Defaults”
button. Restore Factory Defaults restores all settings back to the original
settings.
Selecting Restart will reboot the product.