User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
74
Dialer Application
To allow managing SIP and USB calls in the SIP versions of the product,
Yamaha provides an Android application. This Android app transforms a IP
Wired or wireless tablet into a wireless “dialer” for the CS-700.
Supported Tablets
The minimum Operating System version required is Android 5.1.
Dialer application
To install the dialer application on the tablet, the tablet needs to be connected
to the network. The dialer application should be installed as a full screen home
application.
Installing the dialer application
On the Google Play Store search for the
“Yamaha Unified Communications CS-700
Dialer” Application. Follow the instructions to
install the application on the tablet.
The dialer application should now start on the
tablet. If it does not automatically start,
please find the application in the list of
available application, and start it.
In the application, input the IP address of the
CS-700.
Allow a few seconds for the dialer to connect to
the unit and download data.
The dialer is now ready for use.