User's Manual
Table Of Contents
- Online Resources
- Contents
- Introduction
- About this Manual
- Getting Started
- User Interface
- Dialer Application
- Basic Operations
- Configuring the CS-700
- Configuring using the Web User Interface
- Configuring using the Service Application
- Configuring using a Provisioning Server, Option 66
- Configuring using a Provisioning Server, Option 150
- Provisioning file
- Provisioning file parameters (All Models)
- Using the Application Programming Interface (API)
- USB API functions
- Telnet / SSH interface
- USB/Telnet/SSH CLI Commands
- usb-conn-status
- speaker-volume
- ringer-volume
- speaker-mute
- mute
- camera-ptz-home
- camera-image-defaults
- camera-backlight
- camera-mute
- camera-pan
- cam-pan-left
- cam-pan-right
- camera-tilt
- cam-tilt-up
- cam-tilt-down
- camera-zoom
- cam-zoom-in
- cam-zoom-out
- cam-apply-defaults
- cam-image-apply-defaults
- status
- status-all
- call-info
- start-time
- dial
- answer
- hangup
- hold
- resume
- swap
- join
- transfer
- vm-count
- do-not-disturb
- dtmf
- registration
- Upgrading the Device Firmware
- Appendix
- Limited Warranty and Limitation of Liability
81
Active call
Once the call is established, the dialer screen
will change to an informal screen with call
information. The active call with the telephone
number or contact name that was called is
shown, with the call duration. There are also
call control and audio control buttons.
For audio control, the volume up and volume
down button on the dialer screen are
synchronized with the CS-700 audio behavior.
The microphone mute button on the bottom is
also synchronized with the mute behavior of
the CS-700.
Touching the red phone symbol will end the
call.
The SIP phone line that is active with the call
is shown as active (green) on the bottom of the
dialer screen.
Touching the hold symbol will put the call on hold, touching join allows
creating a conference with other active audio streams.
To enter digits during the call, touch the dial-pad symbol on the bottom to
open the dial pad and enter the digits.