User Guide

36
Getting Started
Transmitting Performance Data
1. In Performance mode, select the CS2x Performance you
want to transmit.
2. In Utility mode (TRANS CH parameter), set the MIDI
channel over which you want the CS2x to transmit the data,
such as channel 1.
3. In Utility mode (BULK DUMP parameter), select the “1Perf”
setting.
4. In XGworks, confirm that track 1 is set to channel 1 and
prepare for real-time recording.
5. After starting recording with XGworks, press the CS2x’s
[ENTER] button to transmit the Performance data.
VWX
MNO
PQR STU
JKL
SPACE
YES
ENTER
&
GHI
NO
QUICK PC
DEF
ABC
YZ
,
.,
2
0
–
5
8
9
6
3
1
4
7
Press the Play button
to activate recording
Bulk transmit start
Confirm the channel
Select the track for
recording
Press the Record button to
activate recording Standby
6. When Performance data transmission is finished, stop the
XGworks recording. Use the List Window to confirm the
data received by XGworks. You can see that the MIDI data
format (BULK DUMP “3-6-4-2”, as shown in the separate
“Data List” book) hexadecimal messages have been
programmed.
List Window
In the Track View Window you can use the Scissors and Eraser
tools to delete data for measures that don’t need data.
For information about saving, see the owner’s manual for
XGworks.
When you play a song with XGworks that has the received data,
the appropriate CS2x Performance is selected automatically and
played precisely as you recorded it.
n Depending on system exclusive data programmed at the top
of the song, you can have the sequencer automatically select
Performance mode, using the system exclusive message as
shown below. This way you can prevent an error caused by
transmitting the Performance bulk data when the CS2x is in
Multi Play mode.
F0 43 1n 63 50 00 06 03 F7 (hexadecimal)
n = Device Number
These settings aren’t limited for use with XGworks only, but will
work with other sequencers as well. Refer to the owner’s manual
of the particular sequencer for related information.
cCS2x_Basic 2/2/99 11:02 AM Page 36