Data List
27
SYNTHESIZER/SEQUENCER PART
1) TRANSMIT FLOW
MIDI <-[SW1]-+--- NOTE ON/OFF 9nH
OUT | |
| +--- CONTROL CHANGE
| | MODULATION BnH,01H
| | PORTAMENTO TIME BnH,05H (CS6x only)
| | PAN BnH,0AH (CS6x only)
| | SUSTAIN SWITCH BnH,40H
| | PORTAMENTO SWITCH BnH,41H (CS6x only)
| | FILTER RESONANCE BnH,47H (CS6x only)
| | EG RELEASE TIME BnH,48H (CS6x only)
| | EG ATTACK TIME BnH,49H (CS6x only)
| | FILTER CUTOFF FREQ BnH,4AH (CS6x only)
| | EG DECAY TIME BnH,4BH (CS6x only)
| | REVERB SEND BnH,5BH (CS6x only)
| | CHORUS SEND BnH,5DH (CS6x only)
| | ASSIGNABLE CONTROLLER BnH,(00H .. 5FH)
| | FOOT VOLUME BnH,(07H or 0BH)
||
| +-[SW8]--BANK SEL MSB BnH,00H
| | BANK SEL LSB BnH,20H
||
| |-[SW2]--EG SUSTAIN LEVEL BnH,1FH (CS6x only)
||
| +--- PROGRAM CHANGE CnH
||
| +--- CHANNEL AFTER TOUCH DnH
||
| +--- PITCH BEND CHANGE EnH
|
|-[SW3,4]--SYSTEM REALTIME MESSAGE
| TIMING CLOCK F8H
|
|-[SW4]---- SYSTEM REALTIME MESSAGE
| START FAH
| CONTINUE FBH
| STOP FCH
|
|
+[SW5]-+---
SYSTEM EXCLUSIVE MESSAGE
||
| |-[SW6]-
SAMPLE DUMP STANDARD
| | DUMP REQUEST F0H 7EH nnH 03H ssH ssH F7H
| | ACK F0H 7EH nnH 7FH ppH F7H
| | NAK F0H 7EH nnH 7EH ppH F7H
| | CANCEL F0H 7EH nnH 7DH ppH F7H
| | WAIT F0H 7EH nnH 7CH ppH F7H
||
| |-[SW7]-<BULK DUMP>
F0H 43H 0nH 64H bhH blH ahH amH alH ddH....ddH ccH F7H
||
| |-[SW7]-
<PARAMETER CHANGE>
F0H 43H 1nH 64H ahH amH alH ddH.....ddH F7H
|
|----------
SYSTEM EXCLUSIVE MESSAGE
| IDENTITY REPLY
F0H 7EH 7FH 06H 02H 43H 00H 41H 2DH 02H 00H 00H 00H 01H F7H
|
|---------- ACTIVE SENSING FEH
[SW1] MIDI Transmit Channel
Master Keyboard Mode = on: complies with Zone Transmit Channel.
Master Keyboard Mode = off: complies with Keyboard Transmit Channel.
The data played back using Sequencer Part will be output through the channels set for
the sequence data, ignoring [SW1] settings.
CS6R transmits BC and A-C/1-2 of ASSIGNABLE CONTROLLER, and the data from the
Sequencer Part. [SW2] MIDI Control Mode
[SW3] MIDI Sync
[SW4] MIDI Control
[SW5] MIDI Device Number
When set to all, data will be output through the channel 1.
[SW6] PHRASE CLIP MODE JOB only. Not available on S80.
[SW7] In the VOICE MODE, VOICE related data only. In the PERFORMANCE MODE, PERFORMANCE
related data only.
SYSTEM data will be transmitted/received in all modes.
[SW8] SYSTEM Bank Select Switch
2) RECEIVE FLOW
MIDI >-[SW11]+--- NOTE OFF 8nH
||
| +--- NOTE ON/OFF 9nH
||
| +--- CONTROL CHANGE
| | MODULATION BnH,01H
| | PORTAMENTO TIME BnH,05H
| | DATA ENTRY MSB BnH,06
| | DATA ENTRY LSB BnH,26H
| | MAIN VOLUME BnH,07H
| | PAN BnH,0AH
| | EXPRESSION BnH,0BH
| | SUSTAIN SWITCH BnH,40H
| | PORTAMENTO SWITCH BnH,41H
| | SOSTENUTO BnH,42H
| | HARMONIC CONTENT BnH,47H
| | EG RELEASE TIME BnH,48H
| | EG ATTACK TIME BnH,49H
| | BRIGHTNESS BnH,4AH
| | EG DECAY TIME BnH,4BH
| | EFFECT1 DEPTH BnH,5BH
| | EFFECT3 DEPTH BnH,5DH
| | DATA ENTRY INC BnH,60H
| | DATA ENTRY DEC BnH,61H
| | ASSIGNABLE CONTROLLER BnH,(00H .. 5FH)
| | RPN
| | PITCH BEND SENS BnH,64H,00H,65H,00H,06H,mmH
| | FINE TUNING BnH,64H,01H,65H,00H,06H,mmH,26H,llH *1
| | COARSE TUNING BnH,64H,02H,65H,00H,06H,mmH *1
| | RPN RESET BnH,64H,7FH,65H,7FH
| | ALL SOUND OFF BnH,78H
| | RESET ALL CONTROLLERS BnH,79H
| | ALL NOTE OFF BnH,7BH
| | OMNI MODE OFF BnH,7CH
| | OMNI MODE ON BnH,7DH
| | MONO MODE BnH,7EH
| | POLY MODE BnH,7FH
||
| +-[SW2]--EG SUSTAIN LEVEL BnH,1FH
||
| +-[SW8]--BANK SEL MSB BnH,00H
| | BANK SEL LSB BnH,20H
||
| +-[SW9]--PROGRAM CHANGE CnH
||
| +--------
CHANNEL AFTER TOUCH
DnH
||
| +--------PITCH BEND CHANGE EnH
|
|
+------+ SYSTEM EXCLUSIVE MESSAGE
| | IDENTITY REQUEST F0H 7EH 0nH 06H 01H F7H
| | REMOTE SWITCH F0H 43H 10H 64H 0AH 00H alH ddH F7H
||
| +-[SW12]- GM MODE ON F0H 7EH 7FH 09H 01H F7H
|
+[SW5]-
+ SYSTEM EXCLUSIVE MESSAGE
| | MIDI MASTER VOLUME F0H 7FH 7FH 04H 01H llH mmH F7H
||
| +-[SW6]--SAMPLE DUMP STANDARD
| | DUMP HEADER F0H 7EH nnH 01H ssH ssH ddH....ddH F7H
| | DATA PACKET F0H 7EH nnH 02H kkH ddH....ddH ccH F7H
| | CANCEL F0H 7EH nnH 7DH ppH F7H
||
| +-[SW10]-<BULK DUMP>
F0H 43H 0nH 64H bhH blH ahH amH alH ddH....ddH ccH F7H
||
| +-[SW7]--<PARAMETER CHANGE> F0H 43H 1nH 64H ahH amH alH ddH.....ddH F7H
||
| +-[SW7]--
<BULK DUMP REQUEST>
F0H 43H 2nH 64H ahH amH alH ddH.....ddH F7H
||
| +-[SW7]--
<PARAMETER REQUEST>
F0H 43H 3nH 64H ahH amH alH F7H
||
| +-[SW12]-XG SYSTEM ON F0H 43H 1nH 4CH 00H 00H 7EH 00H F7H
|
+[SW3]--------- SYSTEM REALTIME MESSAGE
| TIMING CLOCK F8H
|
+[SW4]--------- SYSTEM REALTIME MESSAGE
| START FAH
| CONTINUE FBH
| STOP FCH
|
|
+-------------- ACTIVE SENSING FEH
[SW2] MIDI Control Mode
[SW3] MIDI Sync
[SW4] MIDI Control
[SW5] MIDI Device Number
When set to the number other than off, MIDI MASTER VOLUME will be received.
[SW6] PHRASE CLIP MODE JOB only. Not available on S80.
[SW7] In the VOICE MODE, VOICE related data only. In the PERFORMANCE MODE, PERFORMANCE
related data only.
SYSTEM data will be transmitted/received in all modes.
[SW8] SYSTEM Bank Select Switch
[SW9] SYSTEM Program Change Switch (Received only in the Play Mode when Voice Mode or
Phrase Clip Mode is selected.)
[SW10] SYSTEM Bulk Protect and the conditions mentioned in SW7 above.
[SW11] MIDI Receive Channel and Receive Filter.
In Performance Mode, complies with Part Receive Channel and Part Receive Switch.
In the modes other than Performance Mode, complies with Basic Receive Channel.
[SW12] SYSTEM Receive GM/XG On
*1 Performance Mode only.