Owner`s manual

8 “Import” button

Click this to open the “Import” dialog and import voices from an existing Library file. You

can drag-and-drop voices to the Library Window .

n More than one of these dialogs can be opened simultaneously.

“Import” Dialog

1 “File name:” ................................Shows the name of the Library file from which you will import voice data.

“Open File” button ......................Click this to open the “Open File” dialog and select a Library file to open.

“Memory:” ..................................Click this and choose the Memory from which you will import voice data.

Voice list......................................This area shows all the voices in the selected Memory as a scrollable list,

in order of voice number. You can select a voice here and import it

directly to the voice list in the Library Window by drag-and-drop.

(Multiple voices can also be imported this way.) In Windows, you can

alternatively copy the voice by selecting it and pressing [CTRL]+[C] on

the computer keyboard, and then switch to the Library Window and

press [CTRL]+[V] at the new location to paste (import) it.

n To select a block of voices, click the number of the first voice, hold down the [Shift] key, then click

the last voice .

“Monitor” ....................................If you check this box, the bulk data for each voice you select from the list

will be transferred to your CS6x/CS6R/S80/S30 synthesizer for monitoring.

To monitor the voice, use the keyboard of your CS6x/S80/S30 synthesizer

or the keyboard connected to your CS6R synthesizer.

n Monitoring will not be possible if the MIDI Out port and other parameters in the Editor Setup are not

set correctly. For further details, see page 10.

n You cannot import a Drum Voice to a Normal Voice list or a Normal Voice to a Drum Voice list.

[Close] button ............................Click this to close the Import dialog.