User Manual

Toolbar

Reference Manual

TF Series

NETWORK screen

Allows you to configure the console's network address, which is needed when you connect a

computer to the NETWORK connector.

Configure these settings according to the connected computer or network.

1 IP address provisioning method button

Select the setting that matches how the console will configure its IP address.

DHCP: The console receives its IP address automatically.

Static IP: The console's IP address is set manually.

2 IP Address

Determines the unique address that identifies the console on the network.

3 Subnet Mask

Defines how many bits are used for network addresses on the connected network.

4 Gateway

The address of the network device (gateway) that facilitates communication between

different devices on the network.

5 Unit Name

Allows you to specify a name that can be used to identify the console on the network.

6 PIN for MonitorMix (V1.1 and later)

This is a 4-digit password that is required when accessing the console using the

MonitorMix app. MonitorMix is an iOS-compatible app that allows performers to adjust

the levels of the monitor mix directly from the stage.

NOTE

When connecting the console to a LAN, refer to the TF Editor Installation Guide.

NOTE

When the DHCP button is selected, items 2–4 are not needed.

2–4 are only needed when you select the Static IP button. Configure these parameters as needed.