User Manual

Configuration screens

Reference Manual

TF Series

9 Gain Unlink button (V1.1 and later)

Displayed for stereo channels and for channels that have stereo link turned on.

While you are touching the button, gain for the left and right channels can temporarily

be adjusted individually. When you release the button, the gain for both channels can

be adjusted together but the difference in gain between the two channels is maintained.

INPUT screen menu (V1.1 and later)

Touch the Menu key ( ) from the INPUT screen to display the following items.

Setting stereo link and the input source

1. Display the INPUT screen. (page 5)

2. Touch the stereo link selection button that

corresponds to the desired setting.

3. Touch the input selection button that

corresponds to the desired setting.

4. Use the gain slider to adjust the

head amp gain.

Adjust the gain slider so that the center of

the GainFinder lights up.

GainFinder

Gain slider

5. Touch the digital gain text box to highlight

it, then use the [TOUCH AND TURN] knob to

adjust the setting.

1 All INPUT icon

Allows you to assign the INPUT jacks as the input

source for all input channels.

2 All USB icon

Allows you to assign the USB TO HOST connector

as the input source for all input channels.

The input source for the following channels will be

changed.

TF5: CH 1–32

TF3: CH 1–24 (when CH 1–24 are selected)

CH 25–32 (when CH 25–32 are selected)

TF1: CH 1–16 (when CH 1-16 are selected)

CH 17–32 (when CH 17–32 are selected)

Digital gain

text boxes