User Manual

Configuration screens
Reference Manual
TF Series
- 41 -
EQ screen
Controls the EQ for each channel. 4-band parametric EQ is available for CH 1–32, AUX 1–20,
and STEREO. 2-band parametric EQ is available for CH 33-40, ST IN 1, ST IN 2, FX1, FX2,
and SUB. You can adjust settings using 1-knob mode, which allows you to use the [TOUCH
AND TURN] knob to easily adjust settings, or manual mode, which allows you to adjust each
parameter individually.
4-band parametric EQ
1 EQ button
Turns the EQ on and off.
2 HPF button
Turns the HPF (high-pass filter) on and off.
Displayed for CH 1–40.
3 1-knob button
Switches between 1-knob EQ mode and manual mode.
When using 1-knob EQ mode, the 1-knob level slider is displayed.
4 1-knob level slider
Adjusts the intensity of 1-knob EQ.
When using manual mode, information about the selected band's Q, F, and G is
displayed here.
5 EQ mode type selection button
When using 1-knob EQ mode, allows you to select the 1-knob EQ mode type. Select
[Vocal] for vocal channels, otherwise select [Intensity].
When set to [Intensity], you can adjust the EQ to a setting between flat and double the
intensity of the EQ settings you made using manual mode.
For output channels, [Loudness] is available. This setting allows you to boost low and
high tones.
The available types depend on the channel whose settings you are editing.
In manual mode, this button switches between low-band and high-band filter.
For CH 1-40, the available low-band filters are low-shelving type and bell type. For other
channels (i.e., for channels that do not have an HPF), the available low-band filters are
HPF, low-shelving type, and bell type.
The available high-band filters are LPF, high-shelving type, and bell type.
6 EQ output level meter
Displays the post-EQ level.
7 EQ graph
Displays the parameter settings of the EQ and filter. As you adjust the settings of each
band, the results are reflected in the graph.
When using 1-knob EQ mode, you can touch the level slider and then adjust the slider
using the slider itself or the [TOUCH AND TURN] knob.
When using manual mode, you can drag the handles displayed in the graph to adjust
the corresponding settings.
When HPF is turned on, you can drag the HPF handle to adjust the cutoff frequency. You
can also adjust HPF independently when using the Intensity type for 1-knob EQ mode.
ձղ ճ մ յ
ն
շ
Type
Channel
CH 1–32
HPF +
4-band
CH 33–40
HPF +
2-band
ST IN
2-band
FX
2-band
STEREO
4-band
AUX 1–8
4-band
AUX9/10–
AUX19/20
4-band
SUB
2-band
+ LPF
Intensity
○○○○○○ ○
×
Vocal
○
××××× × ×
Loudness × × × ×
○○ ○
×