User Manual

Configuration screens

Reference Manual

TF Series

ASSIGN screen

Allows you configure recall safe and mute safe settings, DCA group assignments, signals sent to

the SUB bus, etc.

1 Recall Safe button

Turns Recall Safe on and off for the corresponding channel.

You can display the RECALL SAFE screen by touching the jump button in the right corner

of the Recall Safe button. (page 22)

2 Mute Safe button

You can temporarily exclude certain channels from a mute group.

If you mute a mute group, any channels in that group that have mute safe enabled will

not be muted.

3 ST button

Turns the channel's assignment to the stereo channel on and off.

4 SUB button

Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus.

5 SUB level slider

Determines the amount of signal sent from the selected channel to the SUB bus.

6 DCA buttons

Turns the channel's assignment to each DCA group (1–8) on and off.

You can assign a channel to multiple DCA groups if desired.

CH VIEW screen

Provides an overview of all the settings for a channel.

You can change settings using this screen, in addition to the corresponding feature's

configuration screen.

Items displayed on this screen vary depending on the type of channel selected.

1 Channel name

Touch to display the CH NAME screen.

Touch to display information for a different channel.

2 Recall Safe button

Turns Recall Safe on and off for the corresponding channel.

You can display the RECALL SAFE screen (page 22) by touching the jump button in

the right corner of the Recall Safe button.

3 Input source indicator

Displays the input channel's input source. You can select the input source on the INPUT

screen.

4 Mute Safe button

Touch to temporarily exclude the selected channel from the input mute group.

If you mute the input mute group, any channels in that group that have mute safe

enabled will not be muted.

ձղ ճ

ջռսվտ

ձղ մյնշո