User Manual

Configuration screens

Reference Manual

TF Series

5 Channel on/off button

Turns the selected channel on and off.

6 Channel pan slider

Adjusts the pan for the selected channel.

7 SEND TO AUX box

Touch when selected to display the SEND TO AUX screen.

Displays the amount of signal from the selected channel that is sent to each AUX bus.

Send level, the selected channel's fader level, and the actual send level grouped with the

DCA is displayed in the horizontal bar.

The information displayed here indicates whether the signal sent to the AUX bus is the

pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is

displayed in gray.

8 ASSIGN box

Displays the ASSIGN screen. (page 54)

9 Channel output level slider

Adjusts the fader level for the selected channel.

0 Channel output level meter

Displays the channel's output signal level.

DCA 1–DCA 8

1 Channel name

Touch to display the CH NAME screen.

Touch to display information for a different channel.

2 Recall Safe button

Turns recall safe on and off for the corresponding channel.

You can display the RECALL SAFE screen (page 22) by touching the jump button in

the right corner of the Recall Safe button.

3 Channel on/off button

Turns the selected channel on and off.

4 Channel output level slider

Adjusts the fader level for the selected channel.

5 ASSIGN box (V1.1 and later)

When this area is selected, touch this area to display the DCA ASSIGN screen.

(page 66)

AUX 1–AUX 8

1 Channel name

Touch to display the CH NAME screen.

Touch to display information for a different channel.

ղճ

ձղ մյ

նշ