User Manual

Maintenance screen

Reference Manual

TF Series

Maintenance screen

Allows you to access maintenance features.

1 Displays the Initialize All Memory screen. (page 68)

2 Displays the Initialize Current Memory screen. (page 69)

3 Displays the Input Port Trim screen. (page 69)

4 Displays the Output Port Trim screen. (page 70)

5 Displays the Fader Calibration screen. (page 70)

6 Displays the Channel Color Calibration screen. (page 71)

7 Closes the maintenance screen.

Initialize All Memory screen

Resets the console's memory, including Scene memory and Libraries, to the factory default

settings.

1 INITIALIZE button

Initializes the internal memory.

The following data is initialized: all Scene data, all Preset data, mixing data, and setup

data.

Touch to display the confirmation message. Touch the OK button to perform the

operation.

Do not touch any buttons until the initialization is complete.

When initialization is complete, you can continue to use other maintenance features

without exiting.

Using the maintenance screen

1. Turn on the console while pressing the Home key ( ).

The maintenance screen is displayed.

Touch the button that corresponds to the desired maintenance feature.

Touch the Exit button to exit the maintenance mode.

NOTE

• When initializing the internal memory, all data stored in the memory will be lost. Use caution when

performing this operation.

• The internal clock, network settings, and brightness settings are not initialized by this operation.