User Manual

Maintenance screen

Reference Manual

TF Series

Initialize Current Memory screen

Resets the console's current memory to the factory default settings. Scene memory and

Libraries are not reset.

1 INITIALIZE button

Initializes the current memory.

The following data is initialized: mixing data and setup data.

Touch to display the confirmation message. Touch the OK button to perform the

operation.

Do not touch any buttons until the initialization is complete.

When initialization is complete, you can continue to use other maintenance features

without exiting.

Input Port Trim screen

Allows you to adjust the gain of each INPUT jack in 0.01 dB increments.

1 INPUT jack selection buttons

Select the INPUT jack that you want to configure here.

Select the button that corresponds to the INPUT jack you want to configure, and then

use the [TOUCH AND TURN] knob to adjust the value.

After making adjustments, start up the console as usual.

2 Reset All button

Resets all values to 0.00 dB. (The factory default value is 0.00 dB.)

Touch to display the confirmation message. Touch the OK button to perform the

operation.

NOTE

• When initializing the current memory, all data in the current memory will be lost. Use caution when

performing this operation.

NOTE

• When the reset is complete, you can continue to use other maintenance features without exiting.