User Manual

10
TF-RACK Quick Guide
4. Workflow overview
Here’s a brief overview of how to start using the TF-RACK.
1
Connect
Connect the instruments and mics.
Connect output devices such as powered speakers.
Connect the included power cord to the AC IN
connector.
When your connections are finished, turn on the power.
NOTICE
• To ensure that the state is saved properly,
wait at least 10 seconds after performing the
last operation before turning the product off.
This product regularly saves the state of its
workspace so that it can return to the previous
state when the product is turned on.
• After turning the unit off, wait for at least 6
seconds before turning it on again. Rapidly
turning the unit off and on in succession can
cause it to malfunction.
AC IN connector
Power switch
2
Use Presets to Set Up Each Channel
Step1
Select a channel.
C C C L15 R15 C R10 L63
-30
-11
-28
30%
-26
30%
-40
30%
-40
30%
-48
-18
-30
30%
-26
0%
Step2
Press the Library key ( ) to access the Library
and recall a Preset.
Step3
Adjust the channel’s parameters.
Adjust the input gain, EQ, compressor, and gate.
These can be adjusted from the OVERVIEW screen
or the individual configuration screens (page 16).
> Repeat steps 1 to 3 and set up each channel.
Display section
Library key (
)
Input gain adjustment
(INPUT screen)
NOTE
You can set up channels without using Presets. For details about the available features and parameters, refer to the Reference Manual.