Operation Manual

iPhone/iPad Connection Manual

Manual Setup

If you cannot find the desired network on the display, it may be a network with closed or non-disclosure.

In this case, you will need to manually input SSID, security and key settings for connection.

NOTE Check whether your access point supports WPS by referring to the owner’s manual for the access point you

are using.

NOTE The following procedure is for CVP-609. The button name and displayed names differ depending on the

instruments.

For more information on successively inputting the SSID, Security and Password on the display of the

instrument (other than the CVP-609), refer to the Owner's Manual or the Reference Manual of your instrument.

1 As illustrated, input in succession the SSID, Security and Password on the display of the

instrument.

2 Press the [Connect] button as illustrated.

The necessary information is automatically set, and the connection between access point and the

instrument has been completed. Proceed to step 6 on page 12 to connect the access point and iPhone/

iPad.

For example: CVP-609/605

Please set these to the same as the

settings on the access point.