Operation Manual

iPhone/iPad Connection Manual

6 Connect the iPhone/iPad to the access point.

6-1 Call up the Wi-Fi display on your iPhone/iPad by tapping Settings  Wi-Fi.

6-2 Turn ON the Wi-Fi.

6-3 From the network list shown on the display, tap on the network to which you connected your instrument in step 5, or

the instrument that you set to Access Point mode.

If the key is required, input the key, then connect.

7 The connection procedures are completed at step 6. Use the application on your iPhone/iPad

to communicate with your instrument.

NOTE Some applications need the appropriate setting to communicate with the instrument. For details, refer to the

relevant application manuals.

Connecting by the Access Point Mode

When the available access point cannot be found, you can use your instrument as an access point and

connect it to the iPhone/iPad directly (via peer-to-peer Wireless LAN). Please note that when your

instrument is set to Access Point mode, no Internet access is available on your iPhone/iPad, limiting part

of their functions, such as mailing and searching.

NOTE Only the instrument which has the Access Point Mode function can become an access point.

Determine the settings below referring the Owner’s Manual of your instrument.

1 Set the instrument to the Access Point mode.

In the default setting, your instrument is set to Infrastructure mode. Select Access Point mode in the

display for selecting the wireless LAN mode.

2 If necessary, set the SSID, Security, Password, and Channel.

When you are using more than one instrument, set a different SSID and channel for each instrument

to avoid interference.

3 Save the settings.

Now your instrument is available as an access point. Proceed to step 6 on page 12.