Operation Manual

iPhone/iPad Connection Manual

Connection

 Connecting with MIDI terminals or a [USB TO HOST] terminal

1 Turn off the power of the instrument.

Quit any open application software on your iPhone/iPad.

2 Connect your iPhone/iPad to the instrument.

For the proper order, carefully follow the indicated instruction steps for each connection type.

3 Turn on the instrument.

4 The connection procedures are completed at step 3. Use the application on your iPhone/iPad

to communicate with your instrument.

NOTE Some applications need the appropriate setting to communicate with the instrument. For details, refer to the

relevant application manuals.

Operation with iOS 6 or later

Note that iPhone and iPad devices running iOS 6 or later may, on rare occasions, fail to recognize the i-MX1.

If this should occur, update the firmware of the i-MX1 to a new version according to the instructions in the attached PDF in the

Yamaha website i-MX1 product page.