Operation Manual

iPhone/iPad Connection Manual

The connection between the instrument and the access point is complete. Proceed to step 6 on page 12

to connect the access point and iPhone/iPad. If you cannot find the desired network on the display or

you want to set by a method other than described above, see the operations on pages 9 – 11.

NOTE The name of the function described above may differ or the function may not be supported depending on the instrument.

Automatic Setup by WPS

If your access point supports WPS, you can easily connect the instrument to access point by WPS,

without making settings, such as key input, etc.

NOTE Check whether your access point supports WPS by referring to the owner’s manual for the access point you

are using.

NOTE The button name and displayed name differ depending on the instrument.

1 CVP-609/605: As illustrated, press the [Start WPS] button via the display of the instrument.

1 When using the UD-WL01 USB Wireless LAN Adaptor: As illustrated, press and hold the

[WPS] button for longer than three seconds.

The LED lamp of the adaptor flashes.

For example, on the CVP-609/605

LED lamp

[WPS] button