CV P- 609 / CVP-605 Owner’s Manual Mode d’emploi Manual de instrucciones IMPORTANT — Check your power supply — Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped.
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Contents About the Manuals................................................................................. 5 Included Accessories ............................................................................. 5 PRECAUTIONS ....................................................................... 6 Notices and Information ....................................................................... 8 Compatible formats for this instrument ..............................................
About the Manuals This instrument has the following documents and instructional materials. Included Documents Owner’s Manual (this book) Explains the basic operations of the Clavinova. Data List Contains various important preset content lists such as Voices, Styles, etc. Online Materials (Downloadable from the web) Reference Manual (only in English, French, German and Spanish) Explains advanced functions and settings which can be operated from the Menu display (page 24).
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Fire warning • Do not place the power cord near heat sources such as heaters or radiators.
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/Power cord Handling caution • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.
Notices and Information NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. Handling • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
Information About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights.
Welcome to the World of CVP — and the New Touch Screen! This new CVP model is equipped with a convenient touch screen, enabling visual and intuitive control over virtually all instrument functions.
The Lesson features are a fun way to learn and master Songs, with notation shown on the display. Moreover, each key of the keyboard has a Guide lamp, which lights to indicate the notes to be played, letting you practice melodies and phrases smoothly — even if you are a beginner or have trouble reading notation.
Panel Controls 2 3 45 6 7 9 ) @ 1 8 Panel Controls A A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 1 [USB TO DEVICE] terminal ............ page 88 For connecting a USB flash memory or USB wireless LAN adaptor. 2 [P] (Standby/On) switch .................. page 14 For turning the power on or setting it to standby. 3 [MASTER VOLUME] control ........... page 14 For adjusting the overall volume. 4 [DEMO] button ................................. page 11 For calling up the Demo display. 5 [MIC] lamp ......
$ F3 G3 A3 B3 C4 D4 E4 ^ % & * ( F4 G4 A4 B4 C5 D5 E5 Panel Controls # F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7 CVP-609 Music rest (page 17) Key cover (page 14) Sheet music braces (page 17) Guide lamps (page 63) CVP-609 (Grand Piano type) Lid (page 18) I/O connectors (page 84) Pedals (page 35) Music rest (page 17) Sheet music braces (page 17) I/O connectors (page 84) CVP-605 Music rest (page 17) Key cover (page 14) Guide lamps (page 63) Pedals (page 35) Key cover (page 14) Sheet music bra
Starting Up Turning On/Off the Power 1 Connect the power cord. First insert the plug of the power cord into the AC connector on the instrument, then plug the other end of the cable into a proper AC outlet on the wall. 1-1 1-2 Starting Up The shape of the plug and outlet differ depending on locale. 2 Lift the key cover slightly, then push it up and back to open. CAUTION Be careful to avoid catching your fingers when opening the cover. 3 Press the [P] (Standby/On) switch to turn the power on.
5 After you use the instrument, press the [P] (Standby/On) switch to turn the power off. The display and power indicator turn off. During recording, editing and display of certain messages, the power cannot be turned off even if you press the [P] switch. If you want to force-quit the instrument in such a situation, press and hold the [P] switch for longer than three seconds. CAUTION Even when the power switch is turned off, electricity is still flowing to the instrument at the minimum level.
Making the Basic Settings As necessary, make the basic settings such as Language shown on the display. 1 Call up the operation display. First, touch [Menu] at the bottom right corner of the Home display which is shown when the power is turned on. Then touch [] to move to page 2 (if necessary), and touch [Utility] and [System] in order. Starting Up 2 Make the necessary settings by touching the display. Version Indicates the firmware version of this instrument.
Using the Music Rest Pull the music rest toward yourself as far as it will go. When raised, the music rest locks in place at a certain angle and cannot be adjusted. The braces allow you to hold the pages of music books in place. Sheet music braces Starting Up CAUTION When raising or lowering the music rest, do not release your hands from the music rest until it is all the way up or down. To lower the music rest, lift the music rest slightly, then turn it back slowly.
Opening/Closing the Lid (CVP-609 Grand Piano type) One long stay and one short stay are provided on the lid. Use one of them to hold the lid open at desired angle. Opening the Lid 1 Raise the music rest. 2 Raise and hold the right side of the lid (viewed from the keyboard end of the instrument). Starting Up 3 Raise the lid stay and carefully lower the lid so that the end of the stay fits into the recess in the lid.
Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either of these jacks. INPUT VOLUME MIN MIC. LINE IN MIC. LINE Starting Up CAUTION Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss.
Display Structure Turning on this instrument calls up the Home display, from which you can call up the File Selection display and Menu display giving you convenient access to various functions and allowing you to make various settings. For detailed instructions on the display, refer to page 22. File Selection display Style Selection display Voice Selection display Display Structure You can call up the desired type of display by touching the Style name, Voice name or Song name on the Home display.
Display Structure Song Selection display By expanding the Song area, you can call up the playbackrelated controls on the display.
Basic Operations Display Configuration This section covers the most often used displays: Home, File Selection and Menu. The Home display appears when the power is turned on. The File Selection display and Menu display can be called up from the Home display. Home Display Appears when the power is turned on, and can be called up when the [HOME] button is pressed. This display shows the current basic settings such as the current Voice and Style, allowing you to see them at a single glance.
File Selection Display The File Selection display is for selecting a Voice, Style, Song, and other data. You can call up this display by touching the name of the Voice, Style or Song on the Home display, or by pressing one of the VOICE or STYLE buttons, etc. 1 2 3 4 1 Category (Favorite tab) (User tab) Basic Operations A wide variety of data such as Voices and Styles are divided into several categories (tabs) according to the data type.
Menu Display This is the portal display for using various functions and can be called up by touching the [Menu] icon at the bottom right corner of the Home display. NOTE You can call up the Menu display also by flicking upward from the bottom on the Home display. Flicking downward on the Menu display calls up the Home display. 1 2 1 Functions Basic Operations Various convenient functions are shown via icons. Touching each of them calls up the corresponding function.
Display-based Controls The display of this instrument is a special touch screen that allows you to select or change the desired parameter by simply touching the corresponding setting on the display. Data dial [HOME] button Using the Display (Touch Screen) NOTICE Touch To select an item, lightly touch the corresponding indication on the display. Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display.
Rotating the Data Dial Depending on the display, the Data dial can be used in the following two ways. Adjusting the parameter values After selecting the desired parameter, use the Data dial to adjust the value. This is useful if you have difficulty adjusting by touching on the display, or want finer control over the adjustment. Selecting an item from a list Basic Operations In File Selection displays (page 23) and the List windows for setting parameters, use the Data dial to select an item.
Calling up the Desired Functions from the Home Display From all the functions shown on the Menu display, you can pick out an often used one and register it to a shortcut. Registered shortcuts are shown in the Menu area (page 22) at the bottom of the Home display, allowing you to quickly call up the desired function from the Home display. Creating a Shortcut on the Home Display Although seven shortcuts are registered by default, you can customize them as necessary.
Using the ASSIGNABLE Buttons You can assign the functions which you use frequently to these four buttons at the left side of the display. Also the functions listed on the Menu display can be assigned as shortcut. 1 Basic Operations 2 2 3 28 Call up the operation display via [Menu] → [Assignable] → [Assignable]. 3 Touch the desired button number to call up the list. Select the desired item from the functions and shortcuts (equivalent to the functions in the Menu display).
File Management Data you have created such as recorded Song and edited Voice can be saved as files to the instrument (referred to as “User memory”) and the USB flash memory. If you’ve saved a lot of files, you may have trouble finding the desired file quickly. To make operation easier, you can organize your files in folders, rename the files, delete unnecessary files, etc. These operations are done in the File Selection display.
Creating a New Folder Folders can be created, named and organized as desired, making it easier to find and select your original data. 1 NOTE In the File Selection display, touch the User tab (page 23) then select the location to which you want to create a new folder. To show the next higher level folder, touch 2 . Touch [File] to call up the File Management icons. • In User memory, no more than three folder levels can be created.
Copying or Moving Files NOTE 1 2 3 Call up the File Selection display, on which the desired files/folders are shown. Touch [File] to call up the File Management icons. Enter checkmarks to the desired files/folders by touching each item. One or more files/folders can be checked. When you want to enter checkmarks to all displayed items, touch (Check All). Touch (Check All) again to remove all the checkmarks. 4 5 Touch (Copy) or destination.
Registering Files to the Favorite Tab You can call up your favorite or often used Voices or Styles quickly by registering them to the Favorite tab. Touch the star mark ( ) at the right side of each file to register the corresponding file to the Favorite tab. To remove the registered file from the Favorite tab, touch the colored star mark ( ) in the Favorite tab or in the tab which actually contains the corresponding file.
Restrictions for protected Songs Commercially available Song data may be copy protected to prevent illegal copying or accidental erasure. They are marked by the indications at the left side of the file names. The indications and relevant restrictions are detailed below. • (gray) Protected 1: Indicates Preset Songs saved to the “USER” (User memory) and Disklavier Piano Soft Songs. These cannot be copied/moved/saved to external devices.
2 3 Touch []/[] or rotate the Data dial to move the cursor to the desired location. Input the desired character one by one. To delete a single character, touch [Delete]; to delete all characters at once, touch and hold [Delete]. To enter a space, touch the space key indicated in the illustration on the previous page.
Using the Pedals NOTE If the pedal box rattles or gives way when you step on the pedals, turn the adjuster so that it is set firmly against the floor (pages 95, 98, 100). NOTE Damper Pedal (Right) Half-pedal function If you press and hold the damper pedal here, all the notes shown will be sustained. NOTE This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the pedal, the more the sound sustains.
Using the Metronome The [METRONOME ON/OFF] button lets you start or stop the metronome. The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and check how a specific tempo sounds. NOTE You can also change the time signature, volume and sound of the metronome on the display called up via [Menu] [Metronome] [Metronome].
Setting the Touch Sensitivity of the Keyboard Touch Sensitivity determines how the sound responds to your playing strength. This setting does not change the weight of the keyboard. Call up the display via [Menu] → [Keyboard]. NOTE 2 Make the settings by touching the display. Touch Curve The Touch Sensitivity settings may have no effect with certain Voices. Enter checkmarks to the boxes of the desired keyboard parts, then touch here to call up the setting window and select the Touch Sensitivity type.
Transposing the Pitch in Semitones The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the keyboard sound, Style playback, MIDI Song playback, and so on) in semitone steps (from -12 to 12). Pressing the [-] and [+] buttons simultaneously resets the value to 0. You can independently select the part to transpose as desired. Touch the Transpose popup several times until the desired part appears, then use the TRANSPOSE [-]/[+] buttons to transpose it.
Restoring the Factory-programmed Settings While holding the C7 key (right-most key on the keyboard), turn the power on. This restores the all settings to the factory default. C7 + NOTE You can also restore the factory default value of specified settings or delete all files/folders in the User memory on the display called up via [Menu] [Utility] [Factory Reset/Backup] page 1/2. For details, refer to the Reference Manual on the website.
Piano Room – Enjoying the Piano Performance – If you want to simply play the instrument as a piano without having to worry about other unrelated settings, the Piano Room function is exceptionally convenient. No matter what settings you’ve made from the panel, you can instantly call up the settings for the piano performance by a single button press. You can also change the piano settings as you like. Playing the Piano Performance 1 Press the [PIANO ROOM] button to call up the Piano Room display.
Make the desired setups by touching the display. Selecting a piano type Touch the picture of the piano to call up the piano list at the bottom of the display, then select the desired one. The last selected environment for the piano (see below) will automatically be called up when you select a particular piano. Selecting an environment (reverb type) Touch the background picture of the piano to call up the environment list at the bottom of the display, then select the desired one.
Voices – Playing the keyboard – The instrument features a wide variety of exceptionally realistic instrumental Voices, including piano, guitar, strings, brass, wind instruments and more. Playing Preset Voices The Voices can be played via three keyboard parts: Main, Layer and Left. These playing modes allow you to play just one single Voice (Main), play two different Voices in layer (Main and Layer), or play different Voices in the right- and left-hand areas of the keyboard (Main/Layer and Left).
Using the panel buttons NOTE 1-1 To select the keyboard part, press the VOICE [MAIN/LAYER/LEFT] button repeatedly if necessary until the desired part’s lamp lights. 1-1 1-2 1-2 Press one of the desired VOICE category buttons to call up the Voice Selection display. 2 You can select Voices for the Main and Layer parts simply by using the Voice category selection buttons. While holding down one of the Voice category selection buttons, press another Voice category selection button.
NOTE Voice Characteristics At the left side of each Voice name on the Voice Selection display, the icon which represents its defining characteristic is indicated. There are various Voice characteristics; however, only the following ones are covered here. For detailed explanations, refer to the Reference Manual on the website. • / : Super Articulation (SA, SA2) Voices The word “articulation” in music usually refers to the transition or continuity between notes.
Setting the Split Point The key which divides the keyboard into two or three areas is referred to as “Split Point.” There are two types of Split Point: “Left Split Point” and “Style Split Point.” The “Left Split Point” divides the keyboard into the Left Voice area and Main Voice area while the “Style Split Point” divides the keyboard into the Chord area and the Main or Left Voice area. Though both Split Points are at the same key (F#2) by default, you can also set them individually (as shown).
Playing Super Articulation Voices The Super Articulation Voices (SA Voices and SA2 Voices) enable you to create subtle, very realistic musical expressions, simply by how you play. SA Voices The SA Voices provide many benefits with great playability and expressive control in real time. Example: Saxophone Voice If you play a C note and then an adjacent D in a very legato way, you will hear the note change seamlessly, as though a saxophone player played it in a single breath.
Creating Original Organ Flutes Voices The instrument uses advanced digital technology to recreate the legendary sound of vintage organs. Just as on a traditional organ, you can create your own sound by increasing and decreasing the levels of the flute footages. The created Voice can be saved for future recall. 1 On the Voice Selection display, select the desired Organ Flutes Voice.
Styles – Playing Rhythm and Accompaniment – The instrument features a variety of accompaniment and rhythmic backing patterns (called “Styles”) in a variety of different musical genres including pop, jazz, and many others. Each Style features Auto Accompaniment, letting you produce automatic accompaniment playback simply by playing “chords” with your left hand. This lets you automatically recreate the sound of a full band or orchestra — even if you’re playing by yourself.
3 Make sure that the STYLE CONTROL [ACMP ON/OFF] button is turned on. When turned on, the specific left-hand section of the keyboard can be used as the Chord section, and chords played in this section are automatically detected and used as a basis for fully automatic accompaniment with the selected Style. Chord section NOTE Split Point (F#2 as default) 4 The Split Point can be changed as desired (page 45).
Style Control Operations To do this, use the on-screen buttons called up by touching [] in the Style area of the Home display, or use the STYLE CONTROL buttons. NOTE For instructions on adjusting the tempo, refer to page 36. Home display While Style is stopped Style Control While Style is playing Style Control STYLE CONTROL buttons [ACMP ON/OFF], [AUTO FILL IN] and [SYNC STOP] can be controlled only by using the panel buttons.
INTRO [I] – [III] NOTE The instrument features three different Intro sections to add an introduction before starting Style playback. After pressing (or touching) one of the INTRO [I] – [III] buttons, start playback of the Style. When the Intro finishes playing, Style playback automatically shifts to the Main section. When you select INTRO [II] or [III], you need to play chords in the chord section to play the complete Intro section.
Calling up Panel Settings Appropriate for the Current Style (One Touch Setting) One Touch Setting is a powerful and convenient feature that automatically calls up the most appropriate panel settings (Voices or effects, etc.) for the currently selected Style, with the touch of a single button. If you’ve already decided which Style you wish to use, you can have One Touch Setting automatically select the appropriate Voice for you. 1 2 Select the desired Style (steps 1– 2 on page 48).
Memorizing original settings to One Touch Setting You can memorize your original panel settings to the One Touch Setting. The newly created One Touch Setting will be saved in the User tab as a User Style, and you can call up the One Touch Setting as a part of the Style file. Select the desired Style to memorize your One Touch Setting. Make the desired panel settings, such as those for Voices and Effects. Press the [MEMORY] button of REGISTRATION MEMORY.
Calling up Optimum Styles for Your Performance (Style Recommender) This convenient function “recommends” optimum Styles for the song you want to perform, based on the rhythm you play for one or two measures. 1 On the Style selection display, touch Style Recommender display. (Recommender) to call up the 2-1 1 The keyboard is divided (at the B0 key) into two sections as below.
3 Select the desired Style from the list. Listen to the recommended Styles by changing the Sections (page 51), playing chords in the Piano section and adjusting the tempo (page 36). If the Style called up doesn’t match the song you want to play, touch [Retry], then return to step 2-2. 4 5 When you’ve found a Style you’re satisfied with, touch [OK] to exit from the Style Recommender display. Play the keyboard along with the Style you just found.
Lets you finger your own chords on the chord section of the keyboard, while the instrument supplies appropriately orchestrated rhythm, bass, and chord accompaniment in the selected Style. The Fingered type recognizes the various chord types which are listed on the separate Data List booklet and can be looked up using the Chord Tutor function called up via [Menu] → [ChordTutor].
Song Playback – Playing and Practice Songs – For the Clavinova, “Song” refers to MIDI or audio data which include preset songs, commercially available music files, etc. Not only can you play back a Song and listen to it, but you can also play the keyboard along with Song playback. There are two kinds of Songs that can be recorded and played back on this instrument: MIDI Songs and Audio Songs.
2 Touch the desired Song on the display to select it. A Preset Song can be selected from one of the following tabs: • Usage: The Songs are divided into several usages. • Title: The Songs are sorted in alphabetical order. • Genre: The Songs are divided into several genres. The Songs you recorded or the commercially available songs can be selected from one of the following tabs: • : MIDI Songs are listed. • : Audio Songs are listed.
Song Control Operations To control Song playback, you can use the on-screen buttons called up by touching [] in the Song area of the Home display, or use the SONG CONTROL buttons. Home display NOTE For instructions on adjusting the tempo, refer to page 36 for MIDI Songs, and page 65 for Audio Songs. Song Control NOTE For information about [I] (REC), refer to page 66.
Moving the Song Playback Position In the Song area (when expanded) of the Home display, the current position of the Song playback is shown. This can be moved forward or backward by moving the slider on the display. When a MIDI Song is selected: Current measure number Last measure number When an Audio Song is selected: Elapsed time Total time Synchro Start (MIDI Song) You can conveniently start playback of a MIDI Song as soon as you start playing the keyboard.
Displaying Lyrics MIDI Audio When the selected Song contains lyric data, you can view it on the instrument’s display during playback. 1 2 Select a MIDI Song (steps 1 − 2 on page 57). Call up the Lyrics display via [Menu] → [Lyrics]. When the Song data contains lyrics data, the lyrics are shown on the display. You can look through the entire lyrics by touching [] or []when Song playback is stopped. As Song playback starts, the color of the lyrics changes, indicating the current position.
Displaying Text Regardless of whether a Song is selected or not, you can view the text file (.txt) created by using a computer on the instrument’s display. This feature enables various useful possibilities, such as the showing of lyrics, chord names, and text notes. If you want to view the text in a USB flash memory, connect the USB flash memory containing text data to the [USB TO DEVICE] terminal beforehand. 1 Call up the Text display via [Menu] → [TextViewer].
One-handed Practice with the Guide Function MIDI Audio You can mute the right-hand part to try practicing that part on your own. The explanations here apply when you practice the right-hand part with “Follow Lights” of the Guide functions. The guide lamps indicate the notes you should play and when you should play them. You can also practice at your own pace — since the accompaniment waits for you to play the notes correctly.
Repeat Playback MIDI Audio The Song Repeat functions can be used to repeatedly play back a Song or a specific range of measures in a Song. This function controlled in the Song area (when expanded) of the Home display is useful for repeated practicing of difficult-to-play phrases. NOTE • You can play multiple Songs repeatedly: ([Menu] [SongSetting] [Play] [Repeat Mode]).
Adjusting the Pitch in Semitones (Pitch Shift) MIDI Audio Like the Transpose function (page 38) of the MIDI Song, the pitch of an Audio Song in the USB flash memory can be adjusted in semitone steps (from -12 to 12) on the Home display. 2 3 4 Connect the USB flash memory containing Audio Songs to the [USB TO DEVICE] terminal. Select an Audio Song (steps 1 – 2 on page 57). In the Song area (when expanded) of the Home display, touch (Pitch Shift) to call up the Setup window.
Song Recording – Recording Your Performance – This instrument allows you to record your performance in the following two methods. • MIDI recording With this method, recorded performances are saved to the instrument or a USB flash memory as an SMF (format 0) MIDI file. If you want to re-record a specific section or edit parameters such as Voice, use this method. Also if you want to record your performance to each channel one by one, execute Multi Track Recording of the MIDI recording method.
3 Start Recording. With MIDI Recording, you can start recording either by playing the keyboard or touching [Rec Start]. With Audio Recording, start recording by touching [Rec Start]. 3 Part Assignment to Channels (MIDI Recording) With MIDI Recording, you can record your performance to each channel one by one (page 68).
Recording to Specified Channels (MIDI Recording) With MIDI Recording, you can create a MIDI Song consisting of 16 channels by recording your performance to each channel one by one. In recording a piano piece, for example, you can record the right-hand part to channel 1 then record the left-hand part to channel 2, allowing you create a complete piece which may be difficult to play live with both hands together.
To make the settings quickly, simply select the keyboard part ([Extra], [Left] or [Right] located at the bottom left). • Right: This can be selected when recording only the right-hand part. The Main part of the Voice will be recorded to channel 1, and the Layer part will be recorded to channel 3. • Left: This can be selected when recording only the left-hand part. The Left part of the Voice will be recorded to channel 2.
Converting a MIDI Song to an Audio Song You can convert a recorded MIDI Song in the User memory or USB flash memory to an Audio Song by playing back. Conversion is executed by playing back the MIDI Song and re-recording it as an Audio Song. By default, the converted data is saved in WAV format, in the same way as Audio recording (page 66). 1 2 3 Connect the USB flash memory (to which the Audio Song is to be saved) to the [USB TO DEVICE] terminal.
Microphone – Adding Vocal Harmony Effects to Your Singing – By connecting a microphone to the [MIC./LINE IN] jack (standard 1/4" phone jack), you can enjoy singing along with your keyboard performance or with Song playback. The instrument outputs your vocals through the built-in speakers. Moreover, you can automatically apply various Vocal Harmony effects to your voice as you sing.
NOTE Disconnecting the microphone Before turning the power off, make sure to set the [INPUT VOLUME] knob to the minimum position. 1. Set the [INPUT VOLUME] knob to the minimum position. 2. Disconnect the microphone from the [MIC./LINE IN] jack. Applying Vocal Harmony Effects to Your Voice The Vocal Harmony feature lets you add harmonies to your vocal input via the microphone sound. Microphone – Adding Vocal Harmony Effects to Your Singing – 1 2 Connect the microphone to the instrument (page 71).
6 Follow the steps below, depending on which Type (and mode) you selected. If you selected the Chordal Type: 6-1 Make sure that the [ACMP ON/OFF] button is turned on. 6-2 Play back a Style, or play back a Song which contains chords. Vocal harmonies based on the chords are applied to your singing. If you selected the Vocoder or Vocoder-Mono Type: 6-1 As necessary, change the “Keyboard” setting to “Off,” “Upper,” or “Lower.
Music Finder – Calling up Ideal Panel Setups for Your Performance – This feature lets you call up panel settings ideal for your performance simply by selecting a “Record,” which includes Voice and Style settings. If you want to play a certain piece of music but don't know which Style and Voice settings would be appropriate, you can search for relevant Records by the title of the piece.
Selecting the Desired Record (Panel Settings) 1 Call up the Music Finder display via [Menu] → [MusicFinder]. 2 Touch the desired Record. The panel settings in the Record are called up. When the Record including the Style name is selected, ACMP and SYNC START are turned on and the corresponding Style is called up. This lets you start Style playback immediately. If searching for the desired Record is difficult, use the Sort function described below.
Searching for Records (Panel Settings) You can also search for Records by specifying a song title or keyword, using the Search function of Music Finder. 1 Call up the Music Finder display via [Menu] → [MusicFinder]. 2 Search box Music Finder – Calling up Ideal Panel Setups for Your Performance – 76 2 3 Touch the Search box to call up the Character Entry window. Enter the keyword for searching (page 33) to start Search. If you want to input two or more keywords, insert a space between each word.
Registering a Song or Style to a Record 1 In the Song or Style Selection display, select the desired file. NOTE • If you want to register files in the USB flash memory, connect the USB flash memory containing the data to the [USB TO DEVICE] terminal. • Before using a USB flash memory, be sure to read “Connecting USB Devices” on page 88. 2 2 Touch (Add) to call up the Create Record display. As necessary, you can change the Music title and keyword, etc.
Registration Memory – Saving and Recalling Custom Panel Setups – The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for eight Registration Memory buttons should be saved as a single Bank (file). Registering Your Panel Setups 1 Set up the panel controls (such as Voice, Style and so on) as desired.
Saving the Registration Memory as a Bank File You can save all eight registered panel setups as a single Registration Memory Bank file. Bank 04 Bank 03 Bank 02 Bank 01 1 On the Home display, touch [] at the upper right corner to show the Registration area, then touch the area to call up the Registration Bank Selection display. NOTE 2 In general, Registration Memory data (Bank files) is compatible among the models CVP-609/605/601.
Recalling a Registered Panel Setup The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or the following procedure. 1 2 Call up the Registration Bank Selection display (step 1 on page 79). Touch and select the desired Bank on the display. You can also use the REGIST BANK [-]/[+] buttons to select a Bank. 3 Press one of the green-lit numbered buttons ([1] – [8]) in the Registration Memory section.
Mixer – Editing the Volume and Tonal Balance – The Mixer gives you intuitive control over aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to set the optimum balance and stereo image, and lets you set how the effects are applied. Basic Procedure for the Mixer 1 Call up the Mixer display via [Menu] → [Mixer]. 2 3 Touch a tab for editing the balance between the desired parts.
3 Touch a tab for editing the desired parameters. When a tab other than “Master” is selected in step 2: Filter Adjusts the Harmonic Content (resonance) and sound brightness. EQ Adjusts equalization parameters to correct the tone or timbre of the sound. Effect Selects an Effect type and adjusts its depth for each part. Chorus/Reverb Selects a Chorus/Reverb type and adjusts its depth for each part.
To store the Master display settings: Your original edits can be stored as a Master Compressor type and Master EQ type. Up to five types can be stored respectively. To call one of these up in the future, select the corresponding type at the upper right of each display. 1. Touch (Save) in the “Compressor” display or “EQ” display. 2. Select one of USER1 – USER5 then touch [Save] to call up the Character Entry window. 3.
Connections – Using Your Instrument with Other Devices – I/O Connectors NOTE To see where these connectors are located on the instrument, refer to page 13. CVP-609 1 2 Right (higher-key side) 3 4 5 Front (keyboard side) 6 8 7 Left (lower-key side) CVP-605 1 2 Right (higher-key side) 3 4 5 Front (keyboard side) 8 7 Connections – Using Your Instrument with Other Devices – 84 Left (lower-key side) CVP-609/605 ! INPUT VOLUME MIN MIC. LINE IN MIC.
Connecting Audio Devices ([AUX IN] jack, AUX OUT [L/L+R]/[R] jacks) Playing a Portable Audio Player with the Built-in Speakers You can connect the headphone jack of a portable audio player to the instrument’s [AUX IN] jack, letting you hear the sound of that audio player through the built-in speakers of the instrument. Instrument Portable audio player NOTE Use audio cables and adaptor plugs having no (zero) resistance.
Connecting an External Monitor ([VIDEO OUT] jack, [RGB OUT] terminal) By connecting with an external monitor such as a television to the [VIDEO OUT] jack of the instrument, the lyrics and text on the instrument's display can be shown on the television or the monitor. On the CVP-609, the instrument can be connected with an external monitor also by the [RGB OUT] terminal.
Connecting a Footswitch/Foot Controller ([AUX PEDAL] jack) Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller (Yamaha FC7) can be connected to the [AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameter such as volume. NOTE Do not connect or disconnect the pedal when the power is on.
Connecting USB Devices ([USB TO DEVICE] terminal) You can connect a USB flash memory or a USB wireless LAN adaptor to the [USB TO DEVICE] terminal. You can save data you’ve created on the instrument to the USB flash memory (page 29), or you can connect the instrument to a smart device such as iPad via wireless LAN (page 89). Precautions when using the [USB TO DEVICE] terminal When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below.
Formatting a USB Flash Memory When a USB flash memory is connected or media is inserted, a message appears indicating that the connected USB flash memory is not formatted. If so, execute the format operation. 1 2 Connect a USB flash memory for formatting to the [USB TO DEVICE] terminal. Call up the operation display via [Menu] → [Utility] → [USB Memory]. NOTICE The Format operation deletes any previously existing data.
Connecting to a Computer ([USB TO HOST] terminal) By connecting a computer to the [USB TO HOST] terminal, you can transfer data between the instrument and the computer via MIDI. For details on using a computer with this instrument, refer to the “Computer-related Operations” on the website. Instrument Computer NOTICE Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used. NOTE • The instrument will begin transmission a short time after the USB connection is made.
Menu Display Function List This section explains simply and very briefly explains what you can do in the displays which are called up by touching each icon on the Menu display. Some functions are described in this Owner’s Manual on the pages indicated below. For details about each function, refer to the Reference Manual on the website. Description Pages Tempo Adjusts the tempo of MIDI Song, Style or Metronome. The same operation as using Tempo [-]/[+] and [Tap] buttons can be done on the display.
Menu Lets you create a Song by editing the recorded Song. Song Creator Voice Setting Style Setting Song Setting Tuning Tune Adjusts the pitch for each keyboard part (Main/Layer/Left). Piano Edits the parameters for the piano Voices. Voice Set Determines which settings (effects, etc.) linked to the Voices are not called up when selecting a Voice. Setting Determines how the Voice Selection display is opened when one of the VOICE category buttons is pressed.
CVP-609 (Grand piano type) Assembly How to position the main unit CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws.
2 Attach two front legs and a rear leg. Refer to the diagram below to verify the orientation of the legs. 3 Insert the pedal cord plug into the pedal connector. Insert the plug into the connector so that the side with the arrow mark is facing forward (keyboard side). If the plug does not fit easily do not try to force it, but check the plug for correct orientation, and then reinsert it into the connector. Insert the pedal cord securely until the metal part of the cord plug disappears from view.
5 Plug the power cord into the power connector. 7 Attach the headphone hanger. Attach the headphone hanger using two thin screws (4 x 10 mm) as shown in the illustration. For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. After completing the assembly, please check the following. • Are there any parts left over? → Review the assembly procedure and correct any errors.
CVP-609 Assembly CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.
3 Fix unit B to the speaker box of unit A using two short screws (5 x 18 mm). 6 Install unit F. 1 Remove the cover from unit D. Washers If the screw holes do not align, loosen the other screws and adjust the position of unit B. 2 Untie and straighten out the bundled cord. 4 Fasten unit C to unit A in the same way. 3 Attach unit E to unit D. Fix unit E to unit D using two short screws (5 x 18 mm). 3 Pass the pedal cord from under unit D to the backside of the main unit.
10 Attach the headphone hanger. Attach the headphone hanger using two thin screws (4 x 10 mm) as shown in the illustration. Correct Incorrect After completing the assembly, please check the following. 2 Pass the pedal cord between units D and E. 3 Align the pedal cord into the groove on unit D, then install the cover onto the groove correctly. 4 Attach unit G using two screws for the cover (4 x 10 mm). • Are there any parts left over? → Review the assembly procedure and correct any errors.
CVP-605 Assembly CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.
4 Secure unit A to the assembly. Voltage Selector 1 Adjust the position of unit A so that the left and right ends of unit A project beyond units D and E equally (as seen from the front). 2 Secure unit A by tightening six short screws (6 x 16 mm) from the front. 1 A Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas.
CAUTION When moving the instrument, always hold the bottom of the main unit. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Do not hold here. Hold here. Transporting If you move to another location, you can transport the instrument along with other belongings. You can move the unit as it is (assembled) or you can disassemble the unit down to the condition it was in when you first took it out of the box.
Troubleshooting Overall A click or pop is heard when the power is turned on or off. Electrical current is being applied to the instrument. This is normal. The power is automatically turned off. This is normal and due to the Auto Power Off function. If necessary, set the parameter of the Auto Power Off function (page 15). Noise is heard from the instrument’s speakers. Noise may be heard if a mobile phone is used near the instrument or if the phone is ringing.
Overall An existing file is not shown on the display. The file extension (.MID, etc.) may have been changed or deleted. Manually rename the file on a computer, adding the appropriate extension. Data files with names of more than 50 characters cannot be handled by the instrument. Rename the file, reducing the number of characters to 50 or less. Voice The Voice selected from the Voice Selection display does not sound. Check whether or not the selected part is turned on (page 42).
Song (MIDI) The Guide lamps do not light during Song playback, even after turning on the Guide function. Any notes outside of the 88-key range cannot be indicated by the Guide lamps. (MIDI) The Guide lamps light an octave or two lower/ higher than the actual pitch. The Guide lamps sometimes light an octave or two lower/higher than the actual pitch depending on the selected Voice. (MIDI) The tempo, beat, measure and music notation is not displayed correctly.
Pedal/AUX Pedal The damper, sostenuto and soft functions do not work for the relevant pedals. The pedal cord plug is not connected. Securely insert the pedal cord plug into the proper jack (pages 94, 97, 100). Make sure that each pedal is properly assigned to “Sustain,” “Sostenuto” and “Soft” (page 35). The on/off setting of the footswitch connected to the [AUX PEDAL] jack is reversed.
Specifications CVP-609GP (Grand Piano type) Size/Weight [1,435 mm (56-1/2")] 1,426 mm (56-1/8") [1,429 mm (56-1/4")] 1,420 mm (55-15/16") [1,422 mm (56")] Height [For models with polished finish] Without Music Rest [913 mm (35-15/16")] 868 mm (34-3/16") [872 mm (34-5/16")] 868 mm (34-3/16") [872 mm (34-5/16")] With Music Rest [1,077 mm (42-3/8")] 1,025 mm (40-3/8") [1,027 mm (40-7/16")] 1,025 mm (40-3/8") [1,027 mm (40-7/16")] With Lid Up [1,556 mm (61-1/4")] Without Music Rest [1,150 mm (45
CVP-609GP (Grand Piano type) Preset Custom Number of Voices 1,140 Voices + 35 Drum/SFX Kits + 480 XG Voices + GM2 + GS (for GS Song Playback) 847 Voices + 28 Drum/SFX Kits + 480 XG Voices + GM2 + GS (for GS Song Playback) Featured Voices 96 Natural Voices, 164 Super Articulation Voices, 30 Super Articulation 2 Voices, 43 MegaVoices, 31 Sweet! Voices, 80 Cool! Voices, 102 Live! Voices, 30 Organ Flutes! Voices 57 Natural Voices, 62 Super Articulation Voices, 23 MegaVoices, 27 Sweet! Voices, 67 Cool! Vo
CVP-609GP (Grand Piano type) Functions Registration Memory CVP-609 Number of Buttons 8 Control Lesson/Guide Registration Sequence, Freeze Follow Lights, Any Key, Karao-Key, Your Tempo Guide Lamp Yes Performance Assistant Technology (PAT) Yes Demo Overall Controls Yes Metronome Yes Tempo Range 5 – 500, Tap Tempo Transpose -12 – 0 – +12 Tuning 414.8 – 440 – 466.
Index A-B Repeat ........................................................................64 AI Fingered .......................................................................56 AI Full Keyboard ..............................................................56 Assembly .............................................................. 93, 96, 99 ASSIGNABLE buttons ....................................................28 Attack .................................................................................
Multi Finger ......................................................................55 Music Finder .....................................................................74 Music notation .................................................................60 Music rest ..........................................................................17 N Noise Gate .........................................................................85 O One Touch Setting ...........................................................
OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit.
The followings are the titles, credits and copyright notices for fifty seven (57) of the songs pre-installed in this instrument (CVP-609/605): Alfie Theme from the Paramount Picture ALFIE Words by Hal David Music by Burt Bacharach Copyright © 1966 (Renewed 1994) by Famous Music Corporation International Copyright Secured All Rights Reserved All Shook Up Words and Music by Otis Blackwell and Elvis Presley Copyright © 1957 by Shalimar Music Corporation Copyright Renewed and Assigned to Elvis Presley Music All
In The Mood By Joe Garland Copyright © 1939, 1960 Shapiro, Bernstein & Co., Inc., New York Copyright Renewed International Copyright Secured All Rights Reserved Used by Permission Moon River from the Paramount Picture BREAKFAST AT TIFFANY’S Words by Johnny Mercer Music by Henry Mancini Copyright © 1961 (Renewed 1989) by Famous Music Corporation International Copyright Secured All Rights Reserved Isn’t She Lovely Words and Music by Stevie Wonder © 1976 JOBETE MUSIC CO., INC.
(Sittin’ On) The Dock Of The Bay Words and Music by Steve Cropper and Otis Redding Copyright © 1968, 1975 IRVING MUSIC, INC. Copyright Renewed All Rights Reserved Used by Permission Smoke Gets In Your Eyes from ROBERTA Words by Otto Harbach Music by Jerome Kern © 1933 UNIVERSAL - POLYGRAM INTERNATIONAL PUBLISHING, INC. Copyright Renewed All Rights Reserved International Rights Secured. Not for broadcast transmission. DO NOT DUPLICATE. NOT FOR RENTAL.
CVP-609/605 Owner’s Manual 115
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G., Digital Musical Instruments Division © 2012-2013 Yamaha Corporation ZA83740 306MWAP*.