Operation Manual

How do I connect the Clavinova to a computer?

Step 1 Which connector and port should I use?

There are four ways to connect the Clavinova to a computer.

1. Using the Clavinova’s TO HOST connector

Connect the TO HOST connector on the Clavinova to the serial port on the computer.

2. Using the Clavinova’s MIDI connectors

Connect a MIDI interface device between the computer’s serial port and the

Clavinova’s MIDI connector.

3. Using the computer’s USB port

Connect a USB interface device between the computer’s USB port and the

Clavinova’s TO HOST connector or MIDI connector. Use this connection if your

computer does not have a serial port but has a USB port and your Clavinova

does not have a USB connector.

4. Using the Clavinova’s USB connector

Connect the USB connector on the Clavinova to the USB port on the computer.

IBM-PC or compatible with Windows Macintosh

Macintosh modem portD-sub 25-pinD-sub 9-pin

A serial port on an IBM-PC or compatible

computer varies depending on the

model. Check the serial port on your

computer.

MIDI connectors

Computer's USB port

Clavinova's USB connector

Software

Table of Contents What is MIDI? Possibilities Connections Glossary