Owner's Manual

82
5
Song Recording via MIDI – Recording Your Performance via MIDI –
CVP-701 Owner’s Manual
The Multi Channel Recording method let you record data to each channel independently, one by one, up to
16. Here, you will learn how to create a complete, two-handed piano piece by recording the right-hand part
to channel 1, and then recording the left-hand part to channel 2 while listening to the already recorded
data.
1 Make sure that only the PART ON/OFF [RIGHT1] button is turned on, then
select the desired piano Voice (steps 1-3 on page 44).
2 Press the SONG CONTROL [REC] button and the
[STOP] button simultaneously.
A blank Song for recording is automatically created.
3 Record the right-hand part to channel 1.
3-1 While holding down the SONG CONTROL [REC] button, press the [1] button to
set channel 1 to “REC.”
3-2 Select “RIGHT1” (which will be recorded to channel 1) by using the [C]/[D] buttons.
The “RIGHT1” indication refers to your performance using the RIGHT1 Voice (page 44).
NOTE
To cancel the recording, press the SONG CONTROL [STOP] button.
3-3 Play the keyboard with your right-hand. Recording begins automatically as soon as
you play a note on the keyboard. Play the Voice you specified in step 3-2.
4 Press the SONG CONTROL [STOP] button to stop
recording.
5 Press the SONG CONTROL [PLAY/PAUSE] button
to play back the recorded performance.
If you are not satisfied with the results, repeat steps 3 – 5 as
desired.
Complete a Piano Piece by Recording the Right- and Left-hand
Parts Separately (Multi Channel Recording)
3-1
3-2