Owner's Manual

CVP-701 Owner’s Manual

Microphone – Connecting a Microphone and Singing Along with Your Performance –

Microphone

–

Connecting a Microphone and Singing Along with Your Performance

–

By connecting a microphone to the [MIC/LINE IN] jack (standard 1/4" phone jack), you can enjoy singing

along with your keyboard performance or with Song playback. The instrument outputs your vocals

through the built-in speakers.

1 Before turning on the power of the

instrument, set the [INPUT

VOLUME] knob to the minimum

position.

2 Connect the microphone to the

[MIC/LINE IN] jack.

3 Set the [MIC/LINE] switch to

“MIC.”

4 Turn on the power of the

instrument.

5 (If necessary, turn on the microphone.) Adjust the [INPUT VOLUME] knob

while singing into the microphone.

Adjust the control while checking the [MIC] lamp. Make sure to adjust the control so the lamp

lights in green. Make sure that the lamp does not light in red, since this indicates that the input

level is too high.

6 On the Balance display, adjust the volume balance between the microphone

sound and the instrument sound (page 68).

Connecting a Microphone