Owner's Manual

CVP-701 Owner’s Manual

Registration Memory – Saving and Recalling Custom Panel Setups –

Registration Memory

– Saving and Recalling Custom Panel Setups –

The Registration Memory function allows you

to save (or “register”) virtually all panel settings

to a Registration Memory button, and then

instantly recall your custom panel settings by

simply pressing a single button. The registered

settings for eight Registration Memory buttons

should be saved as a single Bank (file).

1 Set up the panel controls (such as Voice, Style, effects, and so on) as desired.

Refer to the separate Data List for a list of parameters that can be registered with the

Registration Memory function.

2 Press the [MEMORY] button in the REGISTRATION MEMORY section.

The display for selecting the items to be registered appears.

3 Select the items you want to register.

Select the desired item by using the [1] – [6] buttons, then enter or remove the

checkmark by using the [7]/[8] (MARK ON) / [7]/[8] (MARK OFF) buttons.

To cancel the operation, press the [I] (CANCEL) button.

4 Press one of the REGISTRATION MEMORY [1] – [8] buttons to which you

wish to memorize the panel setup.

The memorized button becomes red, which indicates the number button contains data and its

number is selected.

NOTICE

If you select the button whose lamp is lit in red or green here, the panel setup previously memorized to the button will be

erased and replaced by the new settings.

Registering Your Panel Setups