Specifications

Basic Operation

■ When function is within “soft” rectangle:...............................

First press the appropriate LCD button under the display (the selected

item is highlighted), and use the data dial or [–/+] to set the items which

are in “soft” rectangles with rounded corners.

Alternately, after selecting the item, press the LCD button again.

For example, when selecting a voice from the display shown below,

press the LCD button below VOICE ▼ ▲ at the lower right. VOICE

then is highlighted, and you can select the desired voice by using the data

dial or the [–/+] buttons.

Display Highlight

• When selecting an item or parameter

in the display, the indication of the

selected item is highlighted (appears in

reverse display).

When holding down a button...

• In some cases, when one of the LCD

buttons or [–/+] buttons is held down,

the value or setting changes continu-

ously.

For functions or parameters that have ▼ and ▲ or < and > indica-

tions, you can reset the value to its basic value by simultaneously press-

ing both LCD buttons (or both [–/+] buttons).

• There are some functions and param-

eters whose settings cannot be re-

turned to the basic value even by

pressing the

▼

and

▲

buttons, or the

and

buttons simultaneously.

■ When function is within “hard” rectangle:.............................

Items within a “hard” rectangle can be directly selected or switched

ON/OFF by simply pressing the corresponding LCD button located di-

rectly below the desired item.

For example , when selecting the first Demo song in the display

shown below, you can immediately begin playback of the first song by

pressing the LCD button under 1.