Specifications

31
Playing Two Voices from Different Sides of the Keyboard — Split Mode
Setting the Volume Balance of the Two Voices
ZPress BAL. from the SPLIT pop-up display. ........................
➔ It is highlighted.
XAdjust the volume balance of the two voices by us-
ing the data dial or [–/+] buttons. ....................................................
Pressing BAL. lets you increase the level of the right voice only.
Equal balance can be instantly reset by simultaneously pressing the [–/+]
buttons.
Volume Balance
• Basic setting: Equal volume
• Backup of last settings: OFF
• The Volume Balance setting globally
affects all voice combinations. Differ-
ent settings cannot be made for each
voice.
The Octave Shift setting lets you adjust the pitch of the two voices up
or down an octave.
Press either LEFT or RIGHT1 of the OCTAVE SHIFT parameter in the
SPLIT pop-up display.
➔ The values change each time the LCD button is pressed. Avail-
able settings are –1, 0, and +1.
Changing the Octave Setting of the Two Voices
::ill.082-split display, octave
shift
Octave Shift
• Settings: – 1 (1 octave lower)
0 (no octave shift)
+ 1 (1 octave higher)
• Basic setting: 0 (no octave shift)
• Backup of last settings: OFF
About the Sounding Range for Octave
Shift
• Notes below and above the original 88-
key range (A–1 to C7) sound one
octave higher and lower, respectively.
• The RIGHT1 setting is effective for
normal playing with one voice. This
setting also affects the RIGHT1 setting
in the DUAL mode (page 26).
• You can use the Single Finger, Multi
Finger, or Fingered modes (page 47)
of the Automatic Accompaniment
function with the Split mode. In this
case, pressing the keys in the left
range will sound the Automatic Accom-
paniment voices as well as the left
range voice.