Specifications

37
● Effect Type List
Setting the Effect Depth
The Effect Depth parameter lets you adjust the degree or depth of the
currently selected effect type. To set this, press R1 DPT (it is high-
lighted), and use the data dial or [–/+] buttons.
Depending on the currently selected voice, the R1 DPT indication
may automatically change to the R2 DPT, L DPT.
Effect Depth
• Range: 0 (no effect) — 100 (maxi-
mum)
• Basic setting: Differs depending on
the voice.
• Backup of last settings: OFF
Pressing R1 DPT also advances the value. To reset the value to the
basic setting, simultaneously press the [–/+] buttons.
• If the Effect Depth is set to 0, the [EF-
FECT] lamp will not light.
You can easily restore the basic settings of the selected voice’s TYPE
and R1 DPT parameters by pressing RESET in the display.
Restoring the Basic Settings
Voice Effects
R1 DPT First voice of Dual mode or right voice of Split mode
R2 DPT Second voice of Dual mode
L DPT Left voice of Split mode
STAGE1
STAGE2 Reverb for solo instruments.
STAGE3
HALL1
HALL2 Concert hall reverb.
HALL3
ROOM1
ROOM2 Small room reverb.
ROOM3
The following parameters can be selected by first selecting the corre-
sponding voice from the main display of the Dual or Split modes.
Reverb Types (selectable from the Effect display)
Effect Types
DELAY L,R Initial delay for each stereo channel,
and two separate feedback delays.
ECHO Stereo delay.
CROSS DELAY Complex effect that sends the de-
layed repeats “bouncing” between
the left and right channels.
TREMOLO Rich Tremolo effect with both volume
and pitch modulation.
ROTARY FAST Rotary speaker simulation.
ROTARY SLOW Rotary speaker simulation.
PHASER Pronounced, metallic modulation with
periodic phase change.
WAH Repeating filter sweep “wah” effect.
CHORUS1
Conventional chorus program with
CHORUS2
rich, warm chorusing.
CHORUS3
CELESTE Three-phase LFO for richer, more
pronounced chorusing.
FLANGER Pronounced three-phase modulation
with slight metallic sound.
SYMPHONIC Exceptionally rich & deep chorusing.
AUTO PAN Several panning effects that auto-
matically shift the sound position (left,
right).
DELAY L,C,R Three independent delays, for the
left, right and center stereo positions.
• If the Reverb Type in Effect is selected and both [REVERB]
and [EFFECT] are set to on, both reverb effects will be applied.