Specifications

65
Custom Style
■ Style Clear ................................................................................................................
Press the STYLE CLEAR LCD button in CUSTOM STYLE display
page 3 to entirely clear the current custom style. The “Are you
sure?” confirmation prompt will appear. Press YES to clear the style or
NO to abort.
■ Volume & Effects...............................................................................................
CUSTOM STYLE display page 4 includes a range of parameters that
let you individually set the volume, reverb, effect, and pan for each part
of each custom style section. Use the SECT. parameter to select the sec-
tion (or “ALL” sections), and the PART parameter to select the part (or
“ALL” parts). The third LCD button selects VOLUME, REVERB, EF-
FECT or PAN, and the VALUE (or DEPTH) parameter sets the amount or
depth. When VOLUME is selected the SECT. parameter is fixed at
“ALL” and the VALUE range is from –50 to +50, relative to the preset
volume of the source style. The REVERB and EFFECT DEPTH ranges
are from 0 to 100. The PAN VALUE settings are L10 (full left) … C
(center) … R10 (full right). When EFFECT is selected the TYPE param-
eter appears and you can also select the effect type via the TYPE LCD
button. The available effect types are listed below.
• Normally the preset VALUE and EF-
FECT TYPE are initially selected. If
PART is set to “ALL”, the R1 part
preset values are displayed. If SEC-
TION is set to “ALL”, the MAIN A pre-
set values are displayed.
• Effect type “OTHERS” may appear if
the preset effect type is other than that
of what is in the list. The “OTHERS”
selection cannot be re-selected once
you change to a different type.
Effect Type List
• CHORUS 1
• CHORUS 2
• CHORUS 3
• CELESTE 1
• CELESTE 2
• CELESTE 3
• FLANGER 1
• FLANGER 2
• OFF