Operation Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-2
3
EAU49392
Indicator lights and warning
lights
CW50/CW50L
CW50N
EAU11030
Turn signal indicator lights “ ”
and “ ” (CW50/CW50L)
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
EAU11020
Turn signal indicator light “ ”
(CW50N)
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
EAU11080
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11181
Oil level warning light “ ”
This warning light comes on when the
key is in the “ ” position or if the oil lev-
el in the 2-stroke engine oil tank is low
during operation. If the warning light
comes on during operation, stop imme-
diately and fill the oil tank with Ya-
malube 2 or equivalent 2-stroke engine
oil of either JASO grade “FC” or ISO
grades “EG-C” or “EG-D”. The warning
light should go off after the 2-stroke en-
gine oil tank has been refilled.
TIP
If the warning light does not come on
when the key is in the “ ” position or
does not go off after the 2-stroke en-
gine oil tank has been refilled, have a
Yamaha dealer check the electrical cir-
cuit.
1. Left turn signal indicator light “ ”
2. Right turn signal indicator light “ ”
3. High beam indicator light “ ”
4. Oil level warning light “ ”
12
34
ZAUM0554
1. High beam indicator light “ ”
2. Turn signal indicator light “ ”
3. Fuel level warning light “ ”
4. Oil level warning light “ ”
ZAUM0962
3
4
2
1
U2B6E1E0.book Page 2 Wednesday, November 7, 2012 11:56 AM